Carlos Garnacho
adb82f0d00
wacom: Drop usage of last-calibration-resolution
...
This is gone from the g-s-d schema, so just stop setting it.
https://bugzilla.gnome.org/show_bug.cgi?id=748660
2015-04-29 19:35:34 +02:00
Carlos Garnacho
6365dafd92
wacom: Sync gsd-wacom-device.[ch] with g-s-d
...
And use the GdkDevice getter where it applies.
2015-04-13 14:38:24 +02:00
Benjamin Tissoires
66cb45bdad
wacom: do not bail out if the tablet doesn't have an eraser
...
Tablets have not always an eraser (most of the generic tablets like Huion,
UC-Logic, etc... don't). We should not reject such tablets.
Commit 54849a9
(wacom: Only the stylus and eraser tools need to exist)
mentioned that we were not sure about eraser, and I think we should not
assume one either.
To do so, we simply ignore the eraser xinput node and rely on
libwacom to actually provide the eraser information.
If the stylus does not have the eraser tip, we may fall in the
LAYOUT_OTHER case. We have a picture of a generic Wacom pen with an
eraser, and the leaders linking the widget to the picture are scrambled.
To prevent that, gray out the eraser pressure slider so that we do not
break the layout.
https://bugzilla.gnome.org/show_bug.cgi?id=746117
2015-04-01 11:15:29 +02:00
Daniel Mustieles
2c5951819d
Updated FSF's address
2014-01-29 11:27:38 +01:00
Yosef Or Boczko
ae36409c5f
wacom: Use margin-start/end instead of margin-left/right
...
https://bugzilla.gnome.org/show_bug.cgi?id=712661
2013-11-19 22:34:39 +02:00
Bastien Nocera
297eb6cfbb
wacom: Fix use after free
...
Causing random values in the calibration data.
2013-10-08 18:59:22 +02:00
Bastien Nocera
6aa409ffdb
wacom: Reset the calibration before starting a new one
...
We shouldn't be using the old calibration values to create the
new ones, so reset the "area" settings before starting a new
calibration, and re-apply the saved calibration if the calibration
is cancelled or fails.
https://bugzilla.gnome.org/show_bug.cgi?id=707784
2013-10-08 18:02:43 +02:00
Bastien Nocera
387e3f98f7
wacom: Print debug when calibration is finished
2013-10-04 11:16:45 +02:00
Joaquim Rocha
d83e0ff5c1
wacom: Call the OSD window for assigning the tablets' buttons
...
It falls back to the listbox view in case the OSD cannot be shown.
https://bugzilla.gnome.org/show_bug.cgi?id=704798
2013-07-26 20:04:35 +02:00
Joaquim Rocha
df161dba18
wacom: Use a GtkListBox for the buttons' mapping instead of a GtkTreeView
...
https://bugzilla.gnome.org/show_bug.cgi?id=703148
2013-07-24 11:18:24 +02:00
Yosef Or Boczko
cf81bc227f
wacom: drop GtkStock
...
https://bugzilla.gnome.org/show_bug.cgi?id=704178
2013-07-19 15:59:26 +03:00
Joaquim Rocha
35e3697b1d
wacom: Expand columns in buttons' assignment treeview
...
Because the GtkCellRendererAccel can't almost be seen.
https://bugzilla.gnome.org/show_bug.cgi?id=703043
2013-07-17 15:51:47 +02:00
Przemo Firszt
3708eab09d
wacom: Show hard-coded action names on OLED too
...
Show hard-coded action names on OLED as well, not just
for custom actions.
https://bugzilla.gnome.org/show_bug.cgi?id=700498
2013-07-15 18:39:02 +02:00
Joaquim Rocha
48164b5a3f
wacom: Fix segfault when trying to check if the tablet has a monitor
...
The check method had been changed in order to use the CcWacomPage
instead of its private struct but one of the calls to it wasn't updated.
2013-06-06 15:32:41 +02:00
Joaquim Rocha
ed3c9badff
wacom: Add cc_wacom_page_calibrate and cc_wacom_page_can_calibrate functions
...
https://bugzilla.gnome.org/show_bug.cgi?id=692816
2013-06-05 18:29:40 +02:00
Joaquim Rocha
d78bc9772a
wacom: Re-write gui_gtk in Clutter to introduce animations
...
The name of the file was also changed to calibratorgui.c/h to avoid
it being inconsistent, this way it is no longer dependent on the
the technology.
https://bugzilla.gnome.org/show_bug.cgi?id=667797
2013-05-17 16:36:59 +02:00
Joaquim Rocha
3cf0addbfe
wacom: Do not unref variant consumed by GSettings
...
This avoids a critical warning.
https://bugzilla.gnome.org/show_bug.cgi?id=700511
2013-05-17 16:18:43 +02:00
Przemo Firszt
16c0a66acf
wacom: Add basic OLED handling for Intuos4
...
This sets the OLED to the keyboard shortcut when a
custom keyboard shortcut is used.
https://bugzilla.gnome.org/show_bug.cgi?id=671072
2013-05-17 09:38:30 +02:00
Joaquim Rocha
2b34736ea8
wacom: Set the last-calibrated-resolution key after calibrating
...
So g-s-d will know if calibration is needed when the monitor resolution
changes.
This is related to https://bugzilla.gnome.org/show_bug.cgi?id=677095
2013-05-16 11:26:29 +02:00
Joaquim Rocha
c74a65acb5
wacom: Prevent failure when device's area cannot be retrieved
...
It also uses fake data from the screen's area. This functionality is
dictated by the definition of FAKE_AREA in CPPFLAGS.
https://bugzilla.gnome.org/show_bug.cgi?id=689686
2013-04-16 14:44:08 +02:00
Joaquim Rocha
9031c41784
wacom: add a link to the mouse settings panel
...
Based on previous work by Olivier Fourdan.
2013-04-16 12:33:16 +02:00
Olivier Fourdan
1f42956437
wacom: small code clean-up
...
we already set a local variable so better use it, it helps with
code readability.
https://bugzilla.gnome.org/show_bug.cgi?id=689684
2013-01-17 11:06:02 +01:00
Cosimo Cecchi
82f8c136c0
wacom: use a GResource for GtkBuilder UI definition and icons
...
https://bugzilla.gnome.org/show_bug.cgi?id=691132
2013-01-07 10:57:17 +01:00
Bastien Nocera
8a0f14b969
wacom: Remove extraneous semi-colon
2012-12-20 16:22:01 +01:00
Bastien Nocera
7d147e06a6
wacom: Clean up action type sanity check
2012-12-20 12:07:00 +01:00
Olivier Fourdan
f5e8101dbd
wacom: check for the action type value
...
Action type comes from GSettings and may have been changed
to some invalid value, causing a segmentation fault in
control-center if the value is larger than the known action
types. This can also occur when downgrading from a version
with more possible actions.
Adds a sanity check to verify the given action type value
is within the bounds of the known action types.
https://bugzilla.gnome.org/show_bug.cgi?id=689265
2012-12-20 11:47:47 +01:00
Bastien Nocera
3ecbd9b3e1
wacom: Better strings for the touchring/touchstrips
...
Use ↺ and ↻ for the touchring buttons, and add context to the
touchstrip labels.
2012-12-20 11:29:33 +01:00
Olivier Fourdan
45d1ca8439
wacom: Use CW and CCW for ring circular motion
...
Using "up" and "down" on a ring is ambiguous, better
use "CW" or "CCW" to indicate the circular motion on
touch rings.
https://bugzilla.gnome.org/show_bug.cgi?id=689264
2012-12-20 10:38:59 +01:00
Olivier Fourdan
bae5488909
wacom: Add show help window to the list of actions
...
for pad buttons, once the OSD window patch is
merged in gnome-settings-daemon.
https://bugzilla.gnome.org/show_bug.cgi?id=683567
2012-12-20 10:38:59 +01:00
Jiro Matsuzawa
ce53dc7fd9
wacom: add translation context for Wacom action type
...
https://bugzilla.gnome.org/show_bug.cgi?id=682876
2012-08-28 16:51:46 +01:00
Olivier Fourdan
a2e515ea39
wacom: add different action types to mapping dialog
...
https://bugzilla.gnome.org/show_bug.cgi?id=679067
2012-08-21 18:00:22 +02:00
Olivier Fourdan
06554439b7
wacom: Do calibration for the selected tool only
...
As different tools may have different resolutions (e.g.
touch vs. stylus on tablets which support both).
https://bugzilla.gnome.org/show_bug.cgi?id=680114
2012-07-19 16:39:36 +01:00
Olivier Fourdan
f004ecb17d
wacom: Fix critical warning after calibration
...
g_variant_new_array() creates a floating reference and
g_settings_set_value() consumes it, so don't unref the GVariant
ourselves.
https://bugzilla.gnome.org/show_bug.cgi?id=680171
2012-07-19 16:37:02 +01:00
Olivier Fourdan
3083fda606
wacom: Destroy display mapping dialogue on unplug
...
https://bugzilla.gnome.org/show_bug.cgi?id=679159
2012-07-04 14:48:54 +02:00
Olivier Fourdan
1612735104
wacom: apply display rotation to device
...
When an output is mapped to a device, match the device rotation
with the output (bug #676170 )
2012-07-03 11:50:36 +02:00
Bastien Nocera
5a2b411255
wacom: Fix crasher using link to display panel
...
->panel was never set within the page object.
2012-05-25 12:16:24 +01:00
Bastien Nocera
aa161bacc9
wacom: Destroy button mapping dialogue on unplug
...
https://bugzilla.gnome.org/show_bug.cgi?id=676790
2012-05-25 11:19:37 +01:00
Peter Hutterer
17c2e2c257
wacom: Make "Calibrate" button insensitive if there is no screen match
...
If no match is found for the screen tablet, calibration will fail anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=673892
2012-05-18 10:35:45 +01:00
Peter Hutterer
ff31b771bb
wacom: update the UI if a new tool comes in
...
The device_added_cb is called once for each tool added. The wacom driver
hotplugs tools in the order stylus, eraser, cursor, pad.
update_current_page will add a new page once a tablet has stylus and
eraser, before cursor and pad exist. priv->pad is thus always NULL,
causing, cc_wacom_page's update_tablet_ui to remove the "Map Buttons..."
button for any device.
Change the code to update the tool list for every new tool we get,
merely triggering the visibility of the button instead of destroying it
completely.
https://bugzilla.gnome.org/show_bug.cgi?id=672691
2012-04-12 14:43:34 +01:00
Bastien Nocera
865d322865
wacom: Add FIXME
2012-02-28 11:38:03 +00:00
Bastien Nocera
c8a24f514e
wacom: Add elevator buttons to the list
2012-02-28 11:37:52 +00:00
Bastien Nocera
dbef08e360
wacom: Remove right-hand margin from nav button
...
https://bugzilla.gnome.org/show_bug.cgi?id=668881
2012-02-27 16:51:36 +00:00
Bastien Nocera
88f743cf45
wacom: Reorder the widgets as per mockup
...
https://bugzilla.gnome.org/show_bug.cgi?id=668881
2012-02-27 16:51:35 +00:00
Bastien Nocera
338fd409ee
wacom: Swap nav button and label for tablet
...
https://bugzilla.gnome.org/show_bug.cgi?id=668881
2012-02-27 16:51:33 +00:00
Bastien Nocera
8a8492ea26
wacom: Monitor the last used stylus
...
And switch to its page on startup, or when drawn near the device
2012-02-20 17:58:14 +01:00
Cosimo Cecchi
d451559391
wacom: align the navigation button box to the end of their row
...
https://bugzilla.gnome.org/show_bug.cgi?id=668881
2012-02-20 11:23:46 +01:00
Cosimo Cecchi
41e55372a9
wacom: split the main page controls in a separate GtkGrid
...
The effect we want to achieve is to have the model name and button box
padded 16px to the left of the tablet controls below.
Pack all the tablet controls in a separate GtkGrid, so we can just set a
margin on that and offset its contents from the model above.
https://bugzilla.gnome.org/show_bug.cgi?id=668881
2012-02-20 11:23:44 +01:00
Bastien Nocera
a13a85b7bb
wacom: Coding style fixes
2012-02-19 16:06:39 +01:00
Bastien Nocera
e0a55d2216
wacom: Make edition match that in the keyboard panel
2012-02-18 16:27:29 +01:00
Bastien Nocera
a3a96fa0f0
wacom: Fix label for hard-coded and disabled buttons
2012-02-18 14:43:04 +01:00