added sddm

.github/workflows/build.yaml

@@ -21,7 +21,7 @@ jobs:
     steps:
       - uses: actions/checkout@v3
       - name: Install Packages via Pacman
-        run: pacman -Sy; pacman --noconfirm -S git archiso python python-pygithub github-cli reflector p7zip  
+        run: pacman -Sy; pacman --noconfirm -S git archiso python python-pygithub github-cli reflector p7zip zip unzip
       - name: Change Arch docker mirror
         run: reflector -c "US" -f 12 -l 10 -n 12 --save /etc/pacman.d/mirrorlist
       - name: Build image
@@ -29,6 +29,9 @@ jobs:
       - name: Upload iso to the release
         run: |
           cd ./out
-          7z -v1000m a "$(ls *.iso)".zip "$(ls *.iso)"
-          md5sum * > md5sums.txt
-          gh release upload ${{ github.event.release.tag_name }} ./* -R ${{ github.repository }}
+          mkdir iso_parts
+          # split -d -b 2000M "$(ls *.iso)" iso_parts/"$(ls *.iso)"_part
+          zip -s 1000m iso_parts/"$(ls *.iso)".zip "$(ls *.iso)"
+          #7z -v1000m a iso_parts/"$(ls *.iso)".zip "$(ls *.iso)"
+          md5sum iso_parts/* > iso_parts/md5sums.txt
+          gh release upload ${{ github.event.release.tag_name }} ./iso_parts/* -R ${{ github.repository }}

iso/airootfs/etc/lightdm/lightdm.conf

@@ -1,168 +0,0 @@
-#
-# General configuration
-#
-# start-default-seat = True to always start one seat if none are defined in the configuration
-# greeter-user = User to run greeter as
-# minimum-display-number = Minimum display number to use for X servers
-# minimum-vt = First VT to run displays on
-# lock-memory = True to prevent memory from being paged to disk
-# user-authority-in-system-dir = True if session authority should be in the system location
-# guest-account-script = Script to be run to setup guest account
-# logind-check-graphical = True to on start seats that are marked as graphical by logind
-# log-directory = Directory to log information to
-# run-directory = Directory to put running state in
-# cache-directory = Directory to cache to
-# sessions-directory = Directory to find sessions
-# remote-sessions-directory = Directory to find remote sessions
-# greeters-directory = Directory to find greeters
-# backup-logs = True to move add a .old suffix to old log files when opening new ones
-# dbus-service = True if LightDM provides a D-Bus service to control it
-#
-
-[LightDM]
-#start-default-seat=true
-#greeter-user=lightdm
-#minimum-display-number=0
-#minimum-vt=7 # Setting this to a value < 7 implies security issues, see FS#46799
-#lock-memory=true
-#user-authority-in-system-dir=false
-#guest-account-script=guest-account
-#logind-check-graphical=false
-#log-directory=/var/log/lightdm
-run-directory=/run/lightdm
-#cache-directory=/var/cache/lightdm
-#sessions-directory=/usr/share/lightdm/sessions:/usr/share/xsessions:/usr/share/wayland-sessions
-#remote-sessions-directory=/usr/share/lightdm/remote-sessions
-#greeters-directory=$XDG_DATA_DIRS/lightdm/greeters:$XDG_DATA_DIRS/xgreeters
-#backup-logs=true
-#dbus-service=true
-
-#
-# Seat configuration
-#
-# Seat configuration is matched against the seat name glob in the section, for example:
-# [Seat:*] matches all seats and is applied first.
-# [Seat:seat0] matches the seat named "seat0".
-# [Seat:seat-thin-client*] matches all seats that have names that start with "seat-thin-client".
-#
-# type = Seat type (local, xremote)
-# pam-service = PAM service to use for login
-# pam-autologin-service = PAM service to use for autologin
-# pam-greeter-service = PAM service to use for greeters
-# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
-# xmir-command = Xmir server command to run (can also contain arguments e.g. Xmir -special-option)
-# xserver-config = Config file to pass to X server
-# xserver-layout = Layout to pass to X server
-# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server
-# xserver-share = True if the X server is shared for both greeter and session
-# xserver-hostname = Hostname of X server (only for type=xremote)
-# xserver-display-number = Display number of X server (only for type=xremote)
-# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)
-# xdmcp-port = XDMCP UDP/IP port to communicate on
-# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)
-# greeter-session = Session to load for greeter
-# greeter-hide-users = True to hide the user list
-# greeter-allow-guest = True if the greeter should show a guest login option
-# greeter-show-manual-login = True if the greeter should offer a manual login option
-# greeter-show-remote-login = True if the greeter should offer a remote login option
-# user-session = Session to load for users
-# allow-user-switching = True if allowed to switch users
-# allow-guest = True if guest login is allowed
-# guest-session = Session to load for guests (overrides user-session)
-# session-wrapper = Wrapper script to run session with
-# greeter-wrapper = Wrapper script to run greeter with
-# guest-wrapper = Wrapper script to run guest sessions with
-# display-setup-script = Script to run when starting a greeter session (runs as root)
-# display-stopped-script = Script to run after stopping the display server (runs as root)
-# greeter-setup-script = Script to run when starting a greeter (runs as root)
-# session-setup-script = Script to run when starting a user session (runs as root)
-# session-cleanup-script = Script to run when quitting a user session (runs as root)
-# autologin-guest = True to log in as guest by default
-# autologin-user = User to log in with by default (overrides autologin-guest)
-# autologin-user-timeout = Number of seconds to wait before loading default user
-# autologin-session = Session to load for automatic login (overrides user-session)
-# autologin-in-background = True if autologin session should not be immediately activated
-# exit-on-failure = True if the daemon should exit if this seat fails
-#
-
-[Seat:*]
-#type=local
-#pam-service=lightdm
-#pam-autologin-service=lightdm-autologin
-#pam-greeter-service=lightdm-greeter
-#xserver-command=X
-#xmir-command=Xmir
-#xserver-config=
-#xserver-layout=
-#xserver-allow-tcp=false
-#xserver-share=true
-#xserver-hostname=
-#xserver-display-number=
-#xdmcp-manager=
-#xdmcp-port=177
-#xdmcp-key=
-greeter-session=lightdm-slick-greeter
-#greeter-hide-users=false
-#greeter-allow-guest=true
-#greeter-show-manual-login=false
-#greeter-show-remote-login=true
-user-session=pantheon
-#allow-user-switching=true
-#allow-guest=true
-#guest-session=
-session-wrapper=/etc/lightdm/Xsession
-#greeter-wrapper=
-#guest-wrapper=
-#display-setup-script=
-#display-stopped-script=
-#greeter-setup-script=
-#session-setup-script=
-#session-cleanup-script=
-#autologin-guest=false
-autologin-user=liveuser
-#autologin-user-timeout=0
-#autologin-in-background=false
-#autologin-session=xfce
-#exit-on-failure=false
-
-#
-# XDMCP Server configuration
-#
-# enabled = True if XDMCP connections should be allowed
-# port = UDP/IP port to listen for connections on
-# listen-address = Host/address to listen for XDMCP connections (use all addresses if not present)
-# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)
-# hostname = Hostname to report to XDMCP clients (defaults to system hostname if unset)
-#
-# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn.  Alternatively
-# it can be a word and the first 7 characters are used as the key.
-#
-greeter-show-manual-login=false
-
-[XDMCPServer]
-#enabled=false
-#port=177
-#listen-address=
-#key=
-#hostname=
-
-#
-# VNC Server configuration
-#
-# enabled = True if VNC connections should be allowed
-# command = Command to run Xvnc server with
-# port = TCP/IP port to listen for connections on
-# listen-address = Host/address to listen for VNC connections (use all addresses if not present)
-# width = Width of display to use
-# height = Height of display to use
-# depth = Color depth of display to use
-#
-
-[VNCServer]
-#enabled=false
-#command=Xvnc
-#port=5900
-#listen-address=
-#width=1024
-#height=768
-#depth=8

iso/airootfs/etc/mkinitcpio.conf

@@ -1,67 +0,0 @@
-# vim:set ft=sh
-# MODULES
-# The following modules are loaded before any boot hooks are
-# run.  Advanced users may wish to specify all system modules
-# in this array.  For instance:
-#     MODULES=(piix ide_disk reiserfs)
-MODULES=()
-
-# BINARIES
-# This setting includes any additional binaries a given user may
-# wish into the CPIO image.  This is run last, so it may be used to
-# override the actual binaries included by a given hook
-# BINARIES are dependency parsed, so you may safely ignore libraries
-BINARIES=()
-
-# FILES
-# This setting is similar to BINARIES above, however, files are added
-# as-is and are not parsed in any way.  This is useful for config files.
-FILES=()
-
-# HOOKS
-# This is the most important setting in this file.  The HOOKS control the
-# modules and scripts added to the image, and what happens at boot time.
-# Order is important, and it is recommended that you do not change the
-# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
-# help on a given hook.
-# 'base' is _required_ unless you know precisely what you are doing.
-# 'udev' is _required_ in order to automatically load modules
-# 'filesystems' is _required_ unless you specify your fs modules in MODULES
-# Examples:
-##   This setup specifies all modules in the MODULES setting above.
-##   No raid, lvm2, or encrypted root is needed.
-#    HOOKS=(base)
-#
-##   This setup will autodetect all modules for your system and should
-##   work as a sane default
-#    HOOKS=(base udev autodetect block filesystems)
-#
-##   This setup will generate a 'full' image which supports most systems.
-##   No autodetection is done.
-#    HOOKS=(base udev block filesystems)
-#
-##   This setup assembles a pata mdadm array with an encrypted root FS.
-##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
-#    HOOKS=(base udev block mdadm encrypt filesystems)
-#
-##   This setup loads an lvm2 volume group on a usb device.
-#    HOOKS=(base udev block lvm2 filesystems)
-#
-##   NOTE: If you have /usr on a separate partition, you MUST include the
-#    usr, fsck and shutdown hooks.
-HOOKS=(base udev modconf memdisk archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_kms block filesystems keyboard)
-
-# COMPRESSION
-# Use this to compress the initramfs image. By default, gzip compression
-# is used. Use 'cat' to create an uncompressed image.
-#COMPRESSION="gzip"
-#COMPRESSION="bzip2"
-#COMPRESSION="lzma"
-COMPRESSION="xz"
-#COMPRESSION="lzop"
-#COMPRESSION="lz4"
-#COMPRESSION="zstd"
-
-# COMPRESSION_OPTIONS
-# Additional options for the compressor
-#COMPRESSION_OPTIONS=()

iso/airootfs/etc/mkinitcpio.conf.d/archiso.conf

@@ -0,0 +1,2 @@
+HOOKS=(base udev modconf kms memdisk archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs block filesystems keyboard)
+COMPRESSION="xz"

iso/airootfs/etc/mkinitcpio.d/linux.preset

@@ -3,6 +3,7 @@
 PRESETS=('archiso')
 
 ALL_kver='/boot/vmlinuz-linux'
-ALL_config='/etc/mkinitcpio.conf'
+archiso_config='/etc/mkinitcpio.conf.d/archiso.conf'
 
 archiso_image="/boot/initramfs-linux.img"
+

iso/airootfs/etc/mkinitcpio.d/parch

@@ -1,14 +0,0 @@
-# mkinitcpio preset file for the 'linux' package on archiso
-
-PRESETS=('default' 'fallback')
-
-ALL_kver='/boot/vmlinuz-linux'
-ALL_config='/etc/mkinitcpio.conf'
-
-#default_config="/etc/mkinitcpio.conf"
-default_image="/boot/initramfs-linux.img"
-#default_options=""
-
-#fallback_config="/etc/mkinitcpio.conf"
-fallback_image="/boot/initramfs-linux-fallback.img"
-fallback_options="-S autodetect"

iso/airootfs/etc/sddm.conf.d/autologin.conf

@@ -0,0 +1,4 @@
+[Autologin]
+Relogin=false
+User=liveuser
+Session=pantheon

iso/airootfs/etc/systemd/system/display-manager.service

@@ -1 +1 @@
-/usr/lib/systemd/system/lightdm.service
+/usr/lib/systemd/system/sddm.service

iso/efiboot/loader/entries/01-archiso-x86_64-linux.conf

@@ -1,7 +1,5 @@
 title    Parch Linux install medium (x86_64, UEFI)
 sort-key 01
 linux    /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-initrd   /%INSTALL_DIR%/boot/intel-ucode.img
-initrd   /%INSTALL_DIR%/boot/amd-ucode.img
 initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 options  archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL%

iso/efiboot/loader/entries/02-archiso-x86_64-speech-linux.conf

@@ -1,7 +1,5 @@
 title    Parch Linux install medium (x86_64, UEFI) with speech
 sort-key 02
 linux    /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-initrd   /%INSTALL_DIR%/boot/intel-ucode.img
-initrd   /%INSTALL_DIR%/boot/amd-ucode.img
 initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 options  archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% accessibility=on

iso/efiboot/loader/entries/03-archiso-x86_64-ram-linux.conf

@@ -1,7 +1,5 @@
 title    Parch Linux install medium (x86_64, UEFI, Copy to RAM)
 sort-key 03
 linux    /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-initrd   /%INSTALL_DIR%/boot/intel-ucode.img
-initrd   /%INSTALL_DIR%/boot/amd-ucode.img
 initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 options  archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% copytoram

iso/efiboot/loader/entries/04-archiso-x86_64-ram-speech-linux.conf

@@ -1,7 +1,5 @@
 title    Parch Linux install medium (x86_64, UEFI, Copy to RAM) with speech
 sort-key 04
 linux    /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-initrd   /%INSTALL_DIR%/boot/intel-ucode.img
-initrd   /%INSTALL_DIR%/boot/amd-ucode.img
 initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 options  archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% copytoram accessibility=on

iso/efiboot/loader/entries/05-archiso-x86_64-compatibility-mode-linux.conf

@@ -0,0 +1,5 @@
+title    Parch Linux install compatibility medium (x86_64, UEFI)
+sort-key 05
+linux    /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
+initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+options  archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% nomodset

iso/efiboot/loader/loader.conf

@@ -1,3 +1,3 @@
 timeout 15
 default 01-archiso-x86_64-linux.conf
-beep off
+beep on

iso/grub/grub.cfg

@@ -29,14 +29,14 @@ menuentry "Parch Linux install medium (x86_64, UEFI)" {
     set gfxpayload=keep
     search --no-floppy --set=root --label %ARCHISO_LABEL%
     linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL%
-    initrd /%INSTALL_DIR%/boot/intel-ucode.img /%INSTALL_DIR%/boot/amd-ucode.img /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+    initrd /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 }
 
 menuentry "Parch Linux install medium with speakup screen reader (x86_64, UEFI)" --hotkey=s {
     set gfxpayload=keep
     search --no-floppy --set=root --label %ARCHISO_LABEL%
     linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% accessibility=on
-    initrd /%INSTALL_DIR%/boot/intel-ucode.img /%INSTALL_DIR%/boot/amd-ucode.img /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+    initrd /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 }
 
 menuentry "UEFI Shell" {

iso/packages.x86_64

@@ -1,4 +1,7 @@
 alsa-utils
+pipewire
+pipewire-pulse
+wireplumber
 amd-ucode
 arch-install-scripts
 archinstall
@@ -140,8 +143,6 @@ android-file-transfer
 
 #Desktop
 xorg-server
-lightdm
-lightdm-pantheon-greeter
 gala
 plank
 wingpanel
@@ -207,17 +208,20 @@ pantheon-onboarding
 pantheon-polkit-agent
 pantheon-shortcut-overlay
 pantheon-sideload
-parch-pantheon
+pantheon
+parch-budgie
+
 #systemutils
 btop
 xdg-user-dirs
-packagekit-qt5
+fastfetch
 neofetch-git
-ttf-dejavu
 firefox
+sddm
 
 #parchlinuxstuff
 calamares
+boost
 calamares-parch
 os-prober
 paru

iso/pacman.conf

@@ -69,6 +69,10 @@ LocalFileSigLevel = Optional
 # repo name header and Include lines. You can add preferred servers immediately
 # after the header, and they will be used before the default mirrors.
 
+[ppr]
+SigLevel = Optional TrustedOnly
+Server = https://raw.githubusercontent.com/parchlinux/ppr/main/x86_64/
+
 #[core-testing]
 #Include = /etc/pacman.d/mirrorlist
 
@@ -90,10 +94,6 @@ Include = /etc/pacman.d/mirrorlist
 #[multilib]
 #Include = /etc/pacman.d/mirrorlist
 
-[ppr]
-SigLevel = Optional TrustedOnly
-Server = https://raw.githubusercontent.com/parchlinux/ppr/main/x86_64/
-
 [pcp]
 SigLevel = Optional TrustedOnly
 Server = https://raw.githubusercontent.com/parchlinux/pcp/main/x86_64/

iso/profiledef.sh

@@ -1,16 +1,16 @@
 #!/usr/bin/env bash
 # shellcheck disable=SC2034
 
-iso_name="Parchlinux"
-iso_label="PARCH_$(date +%Y%m)"
-iso_publisher="Parch Linux <https://parchlinux.ir>"
+iso_name="Parchlinux Community Pantheon"
+iso_label="PARCH_LINUX_PANTHEON$(date +%Y%m)"
+iso_publisher="Parch Linux <https://parchlinux.com>"
 iso_application="Parch Linux Live/Rescue CD"
 iso_version="$(date +%Y.%m.%d)"
 install_dir="arch"
 buildmodes=('iso')
 bootmodes=('bios.syslinux.mbr' 'bios.syslinux.eltorito'
-	   'uefi-ia32.grub.esp' 'uefi-x64.systemd-boot.esp'
-	   'uefi-ia32.grub.eltorito' 'uefi-x64.systemd-boot.eltorito')
+	   'uefi-x64.systemd-boot.esp'
+	   'uefi-x64.systemd-boot.eltorito')
 arch="x86_64"
 pacman_conf="pacman.conf"
 airootfs_image_type="squashfs"

iso/syslinux/archiso_sys-linux.cfg

@@ -5,7 +5,7 @@ It allows you to install Parch Linux or perform system maintenance.
 ENDTEXT
 MENU LABEL Parch Linux install medium (x86_64, BIOS)
 LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+INITRD /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL%
 
 # Accessibility boot option
@@ -16,7 +16,7 @@ It allows you to install Parch Linux or perform system maintenance with speech f
 ENDTEXT
 MENU LABEL Parch Linux install medium (x86_64, BIOS) with ^speech
 LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+INITRD /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% accessibility=on
 
 # Copy to RAM boot option
@@ -27,5 +27,17 @@ It allows you to install Parch Linux or perform system maintenance.
 ENDTEXT
 MENU LABEL Parch Linux install medium (x86_64, BIOS, Copy to RAM)
 LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+INITRD /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% copytoram
+
+
+#  compatibility boot option
+LABEL arch64compatibility
+TEXT HELP
+Boot the Parch Linux install medium on BIOS with compatibility mode.
+It allows you to install Parch Linux or perform system maintenance.
+ENDTEXT
+MENU LABEL Parch Linux install medium (x86_64, BIOS, compatibility)
+LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
+INITRD /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% nomodset