moved to community

iso/airootfs/etc/mkinitcpio.conf

@@ -1,67 +0,0 @@
-# vim:set ft=sh
-# MODULES
-# The following modules are loaded before any boot hooks are
-# run.  Advanced users may wish to specify all system modules
-# in this array.  For instance:
-#     MODULES=(piix ide_disk reiserfs)
-MODULES=()
-
-# BINARIES
-# This setting includes any additional binaries a given user may
-# wish into the CPIO image.  This is run last, so it may be used to
-# override the actual binaries included by a given hook
-# BINARIES are dependency parsed, so you may safely ignore libraries
-BINARIES=()
-
-# FILES
-# This setting is similar to BINARIES above, however, files are added
-# as-is and are not parsed in any way.  This is useful for config files.
-FILES=()
-
-# HOOKS
-# This is the most important setting in this file.  The HOOKS control the
-# modules and scripts added to the image, and what happens at boot time.
-# Order is important, and it is recommended that you do not change the
-# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
-# help on a given hook.
-# 'base' is _required_ unless you know precisely what you are doing.
-# 'udev' is _required_ in order to automatically load modules
-# 'filesystems' is _required_ unless you specify your fs modules in MODULES
-# Examples:
-##   This setup specifies all modules in the MODULES setting above.
-##   No raid, lvm2, or encrypted root is needed.
-#    HOOKS=(base)
-#
-##   This setup will autodetect all modules for your system and should
-##   work as a sane default
-#    HOOKS=(base udev autodetect block filesystems)
-#
-##   This setup will generate a 'full' image which supports most systems.
-##   No autodetection is done.
-#    HOOKS=(base udev block filesystems)
-#
-##   This setup assembles a pata mdadm array with an encrypted root FS.
-##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
-#    HOOKS=(base udev block mdadm encrypt filesystems)
-#
-##   This setup loads an lvm2 volume group on a usb device.
-#    HOOKS=(base udev block lvm2 filesystems)
-#
-##   NOTE: If you have /usr on a separate partition, you MUST include the
-#    usr, fsck and shutdown hooks.
-HOOKS=(base udev modconf memdisk archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_kms block filesystems keyboard)
-
-# COMPRESSION
-# Use this to compress the initramfs image. By default, gzip compression
-# is used. Use 'cat' to create an uncompressed image.
-#COMPRESSION="gzip"
-#COMPRESSION="bzip2"
-COMPRESSION="lzma"
-#COMPRESSION="xz"
-#COMPRESSION="lzop"
-#COMPRESSION="lz4"
-#COMPRESSION="zstd"
-
-# COMPRESSION_OPTIONS
-# Additional options for the compressor
-#COMPRESSION_OPTIONS=()

iso/airootfs/etc/mkinitcpio.d/linux.preset

@@ -3,6 +3,7 @@
 PRESETS=('archiso')
 
 ALL_kver='/boot/vmlinuz-linux'
-ALL_config='/etc/mkinitcpio.conf'
+archiso_config='/etc/mkinitcpio.conf.d/archiso.conf'
 
 archiso_image="/boot/initramfs-linux.img"
+

iso/airootfs/etc/mkinitcpio.d/parch

@@ -1,14 +0,0 @@
-# mkinitcpio preset file for the 'linux' package on archiso
-
-PRESETS=('default' 'fallback')
-
-ALL_kver='/boot/vmlinuz-linux'
-ALL_config='/etc/mkinitcpio.conf'
-
-#default_config="/etc/mkinitcpio.conf"
-default_image="/boot/initramfs-linux.img"
-#default_options=""
-
-#fallback_config="/etc/mkinitcpio.conf"
-fallback_image="/boot/initramfs-linux-fallback.img"
-fallback_options="-S autodetect"

iso/efiboot/loader/entries/01-archiso-x86_64-linux.conf

@@ -1,7 +1,5 @@
 title    Parch Linux install medium (x86_64, UEFI)
 sort-key 01
 linux    /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-initrd   /%INSTALL_DIR%/boot/intel-ucode.img
-initrd   /%INSTALL_DIR%/boot/amd-ucode.img
 initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 options  archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL%

iso/efiboot/loader/entries/02-archiso-x86_64-speech-linux.conf

@@ -1,7 +1,5 @@
 title    Parch Linux install medium (x86_64, UEFI) with speech
 sort-key 02
 linux    /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-initrd   /%INSTALL_DIR%/boot/intel-ucode.img
-initrd   /%INSTALL_DIR%/boot/amd-ucode.img
 initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 options  archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% accessibility=on

iso/efiboot/loader/entries/03-archiso-x86_64-ram-linux.conf

@@ -1,7 +1,5 @@
 title    Parch Linux install medium (x86_64, UEFI, Copy to RAM)
 sort-key 03
 linux    /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-initrd   /%INSTALL_DIR%/boot/intel-ucode.img
-initrd   /%INSTALL_DIR%/boot/amd-ucode.img
 initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 options  archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% copytoram

iso/efiboot/loader/entries/04-archiso-x86_64-ram-speech-linux.conf

@@ -1,7 +1,5 @@
 title    Parch Linux install medium (x86_64, UEFI, Copy to RAM) with speech
 sort-key 04
 linux    /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-initrd   /%INSTALL_DIR%/boot/intel-ucode.img
-initrd   /%INSTALL_DIR%/boot/amd-ucode.img
 initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 options  archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% copytoram accessibility=on

iso/efiboot/loader/loader.conf

@@ -1,3 +1,3 @@
 timeout 15
 default 01-archiso-x86_64-linux.conf
-beep off
+beep on

iso/grub/grub.cfg

@@ -29,14 +29,14 @@ menuentry "Parch Linux install medium (x86_64, UEFI)" {
     set gfxpayload=keep
     search --no-floppy --set=root --label %ARCHISO_LABEL%
     linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL%
-    initrd /%INSTALL_DIR%/boot/intel-ucode.img /%INSTALL_DIR%/boot/amd-ucode.img /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+    initrd /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 }
 
 menuentry "Parch Linux install medium with speakup screen reader (x86_64, UEFI)" --hotkey=s {
     set gfxpayload=keep
     search --no-floppy --set=root --label %ARCHISO_LABEL%
     linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% accessibility=on
-    initrd /%INSTALL_DIR%/boot/intel-ucode.img /%INSTALL_DIR%/boot/amd-ucode.img /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+    initrd /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 }
 
 menuentry "UEFI Shell" {

iso/packages.x86_64

@@ -126,7 +126,7 @@ usb_modeswitch
 usbmuxd
 usbutils
 vim
-virtualbox-guest-utils-nox
+virtualbox-guest-utils
 vpnc
 which
 wireless-regdb
@@ -150,6 +150,7 @@ xreader
 engrampa
 unzip
 unrar
+p7zip
 xfce4-goodies
 nordzy-cursors
 nordic-bluish-accent-standard-buttons-theme
@@ -159,11 +160,9 @@ xfce-parch
 #systemutils
 btop
 xdg-user-dirs
-keepassxc
 networkmanager
 network-manager-applet
 pavucontrol
-ttf-dejavu
 android-file-transfer
 gvfs-mtp
 broadcom-wl-dkms
@@ -171,6 +170,9 @@ gparted
 parch-grub
 fira-code-font
 fira-code-mono
+galculator
+catfish
+yt-dlp
 
 #parchlinuxstuff
 calamares
@@ -188,8 +190,28 @@ parch-wallpapers
 dracula-gtk-theme
 bash-completion
 neofetch-git
+fastfetch
 parch-welcome
 parch-sddm-theme
 parch-plymouth
 plymouth
 boost
+parch-printer
+system-config-printer
+
+#video drivers
+xf86-input-elographics
+#xf86-input-evdev
+xf86-input-libinput
+#xf86-input-vmmouse
+#xf86-input-void
+#xf86-video-amdgpu
+#xf86-video-ati
+#xf86-video-fbdev
+#xf86-video-intel
+#xf86-video-nouveau
+#xf86-video-openchrome
+#xf86-video-vesa
+xf86-video-vmware
+mesa
+

iso/pacman.conf

@@ -34,7 +34,7 @@ Architecture = auto
 #NoProgressBar
 CheckSpace
 #VerbosePkgLists
-ParallelDownloads = 5
+#ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -69,6 +69,10 @@ LocalFileSigLevel = Optional
 # repo name header and Include lines. You can add preferred servers immediately
 # after the header, and they will be used before the default mirrors.
 
+[ppr]
+SigLevel = Optional TrustedOnly
+Server = https://raw.githubusercontent.com/parchlinux/ppr/main/x86_64/
+
 #[core-testing]
 #Include = /etc/pacman.d/mirrorlist
 
@@ -90,10 +94,6 @@ Include = /etc/pacman.d/mirrorlist
 #[multilib]
 #Include = /etc/pacman.d/mirrorlist
 
-[ppr]
-SigLevel = Optional TrustedOnly
-Server = https://raw.githubusercontent.com/parchlinux/ppr/main/x86_64/
-
 [pcp]
 SigLevel = Optional TrustedOnly
 Server = https://raw.githubusercontent.com/parchlinux/pcp/main/x86_64/

iso/syslinux/archiso_sys-linux.cfg

@@ -5,7 +5,7 @@ It allows you to install Parch Linux or perform system maintenance.
 ENDTEXT
 MENU LABEL Parch Linux install medium (x86_64, BIOS)
 LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+INITRD /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL%
 
 # Accessibility boot option
@@ -16,7 +16,7 @@ It allows you to install Parch Linux or perform system maintenance with speech f
 ENDTEXT
 MENU LABEL Parch Linux install medium (x86_64, BIOS) with ^speech
 LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+INITRD /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% accessibility=on
 
 # Copy to RAM boot option
@@ -27,5 +27,17 @@ It allows you to install Parch Linux or perform system maintenance.
 ENDTEXT
 MENU LABEL Parch Linux install medium (x86_64, BIOS, Copy to RAM)
 LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+INITRD /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% copytoram
+
+
+#  compatibility boot option
+LABEL arch64compatibility
+TEXT HELP
+Boot the Parch Linux install medium on BIOS with compatibility mode.
+It allows you to install Parch Linux or perform system maintenance.
+ENDTEXT
+MENU LABEL Parch Linux install medium (x86_64, BIOS, compatibility)
+LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
+INITRD /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% nomodset