diff --git a/desktops/hyprland/etc/skel/config/dunst/dunstrc b/desktops/hyprland/etc/skel/config/dunst/dunstrc new file mode 100644 index 0000000..8d740bd --- /dev/null +++ b/desktops/hyprland/etc/skel/config/dunst/dunstrc @@ -0,0 +1,465 @@ +# See dunst(5) for all configuration options + +[global] + ### Display ### + + # Which monitor should the notifications be displayed on. + monitor = 0 + + # Display notification on focused monitor. Possible modes are: + # mouse: follow mouse pointer + # keyboard: follow window with keyboard focus + # none: don't follow anything + # + # "keyboard" needs a window manager that exports the + # _NET_ACTIVE_WINDOW property. + # This should be the case for almost all modern window managers. + # + # If this option is set to mouse or keyboard, the monitor option + # will be ignored. + follow = none + + ### Geometry ### + + # dynamic width from 0 to 300 + # width = (0, 300) + # constant width of 300 + width = 300 + + # The maximum height of a single notification, excluding the frame. + height = 300 + + # Position the notification in the top right corner + # origin = top-right + origin = bottom-right + + # Offset from the origin + offset = 10x50 + + # Scale factor. It is auto-detected if value is 0. + scale = 0 + + # Maximum number of notification (0 means no limit) + notification_limit = 0 + + ### Progress bar ### + + # Turn on the progess bar. It appears when a progress hint is passed with + # for example dunstify -h int:value:12 + progress_bar = true + + # Set the progress bar height. This includes the frame, so make sure + # it's at least twice as big as the frame width. + progress_bar_height = 10 + + # Set the frame width of the progress bar + progress_bar_frame_width = 1 + + # Set the minimum width for the progress bar + progress_bar_min_width = 150 + + # Set the maximum width for the progress bar + progress_bar_max_width = 300 + + + # Show how many messages are currently hidden (because of + # notification_limit). + indicate_hidden = yes + + # The transparency of the window. Range: [0; 100]. + # This option will only work if a compositing window manager is + # present (e.g. xcompmgr, compiz, etc.). (X11 only) + transparency = 0 + + # Draw a line of "separator_height" pixel height between two + # notifications. + # Set to 0 to disable. + # If gap_size is greater than 0, this setting will be ignored. + separator_height = 2 + + # Padding between text and separator. + padding = 8 + + # Horizontal padding. + horizontal_padding = 10 + + # Padding between text and icon. + text_icon_padding = 0 + + # Defines width in pixels of frame around the notification window. + # Set to 0 to disable. + frame_width = 2 + + # Defines color of the frame around the notification window. + # frame_color = "#282a36" + # foreground = "#F8F8F2" + # background = "#040612" + + # Size of gap to display between notifications - requires a compositor. + # If value is greater than 0, separator_height will be ignored and a border + # of size frame_width will be drawn around each notification instead. + # Click events on gaps do not currently propagate to applications below. + gap_size = 0 + + # Define a color for the separator. + # possible values are: + # * auto: dunst tries to find a color fitting to the background; + # * foreground: use the same color as the foreground; + # * frame: use the same color as the frame; + # * anything else will be interpreted as a X color. + separator_color = frame + + # Sort messages by urgency. + sort = yes + + # Don't remove messages, if the user is idle (no mouse or keyboard input) + # for longer than idle_threshold seconds. + # Set to 0 to disable. + # A client can set the 'transient' hint to bypass this. See the rules + # section for how to disable this if necessary + # idle_threshold = 120 + + ### Text ### + + font = Noto Sans 10 + + # The spacing between lines. If the height is smaller than the + # font height, it will get raised to the font height. + line_height = 0 + + # Possible values are: + # full: Allow a small subset of html markup in notifications: + # bold + # italic + # strikethrough + # underline + # + # For a complete reference see + # . + # + # strip: This setting is provided for compatibility with some broken + # clients that send markup even though it's not enabled on the + # server. Dunst will try to strip the markup but the parsing is + # simplistic so using this option outside of matching rules for + # specific applications *IS GREATLY DISCOURAGED*. + # + # no: Disable markup parsing, incoming notifications will be treated as + # plain text. Dunst will not advertise that it has the body-markup + # capability if this is set as a global setting. + # + # It's important to note that markup inside the format option will be parsed + # regardless of what this is set to. + markup = full + + # The format of the message. Possible variables are: + # %a appname + # %s summary + # %b body + # %i iconname (including its path) + # %I iconname (without its path) + # %p progress value if set ([ 0%] to [100%]) or nothing + # %n progress value if set without any extra characters + # %% Literal % + # Markup is allowed + format = "%s\n%b" + + # Alignment of message text. + # Possible values are "left", "center" and "right". + alignment = left + + # Vertical alignment of message text and icon. + # Possible values are "top", "center" and "bottom". + vertical_alignment = center + + # Show age of message if message is older than show_age_threshold + # seconds. + # Set to -1 to disable. + show_age_threshold = 60 + + # Specify where to make an ellipsis in long lines. + # Possible values are "start", "middle" and "end". + ellipsize = middle + + # Ignore newlines '\n' in notifications. + ignore_newline = no + + # Stack together notifications with the same content + stack_duplicates = true + + # Hide the count of stacked notifications with the same content + hide_duplicate_count = false + + # Display indicators for URLs (U) and actions (A). + show_indicators = yes + + ### Icons ### + + # Recursive icon lookup. You can set a single theme, instead of having to + # define all lookup paths. + enable_recursive_icon_lookup = true + + # Set icon theme (only used for recursive icon lookup) + #icon_theme = Adwaita + #icon_theme = Dracula + + # You can also set multiple icon themes, with the leftmost one being used first. + # icon_theme = "Adwaita, breeze" + + # Align icons left/right/top/off + icon_position = right + + # Scale small icons up to this size, set to 0 to disable. Helpful + # for e.g. small files or high-dpi screens. In case of conflict, + # max_icon_size takes precedence over this. + min_icon_size = 32 + + # Scale larger icons down to this size, set to 0 to disable + max_icon_size = 128 + + # Paths to default icons (only neccesary when not using recursive icon lookup) + icon_path = /usr/share/icons/gnome/16x16/status/:/usr/share/icons/gnome/16x16/devices/ + #icon_path = /use/share/icons/Papirus-Dark/ + + ### History ### + + # Should a notification popped up from history be sticky or timeout + # as if it would normally do. + sticky_history = yes + + # Maximum amount of notifications kept in history + history_length = 20 + + ### Misc/Advanced ### + + # dmenu path. + dmenu = /usr/bin/dmenu -p dunst: + + # Browser for opening urls in context menu. + browser = /usr/bin/xdg-open + + # Always run rule-defined scripts, even if the notification is suppressed + always_run_script = true + + # Define the title of the windows spawned by dunst + title = Dunst + + # Define the class of the windows spawned by dunst + class = Dunst + + # Define the corner radius of the notification window + # in pixel size. If the radius is 0, you have no rounded + # corners. + # The radius will be automatically lowered if it exceeds half of the + # notification height to avoid clipping text and/or icons. + corner_radius = 15 + + # Ignore the dbus closeNotification message. + # Useful to enforce the timeout set by dunst configuration. Without this + # parameter, an application may close the notification sent before the + # user defined timeout. + ignore_dbusclose = false + + ### Wayland ### + # These settings are Wayland-specific. They have no effect when using X11 + + # Uncomment this if you want to let notications appear under fullscreen + # applications (default: overlay) + # layer = top + + # Set this to true to use X11 output on Wayland. + force_xwayland = false + + ### Legacy + + # Use the Xinerama extension instead of RandR for multi-monitor support. + # This setting is provided for compatibility with older nVidia drivers that + # do not support RandR and using it on systems that support RandR is highly + # discouraged. + # + # By enabling this setting dunst will not be able to detect when a monitor + # is connected or disconnected which might break follow mode if the screen + # layout changes. + force_xinerama = false + + ### mouse + + # Defines list of actions for each mouse event + # Possible values are: + # * none: Don't do anything. + # * do_action: Invoke the action determined by the action_name rule. If there is no + # such action, open the context menu. + # * open_url: If the notification has exactly one url, open it. If there are multiple + # ones, open the context menu. + # * close_current: Close current notification. + # * close_all: Close all notifications. + # * context: Open context menu for the notification. + # * context_all: Open context menu for all notifications. + # These values can be strung together for each mouse event, and + # will be executed in sequence. + mouse_left_click = close_current + mouse_middle_click = do_action, close_current + mouse_right_click = close_all + +# Experimental features that may or may not work correctly. Do not expect them +# to have a consistent behaviour across releases. +[experimental] + # Calculate the dpi to use on a per-monitor basis. + # If this setting is enabled the Xft.dpi value will be ignored and instead + # dunst will attempt to calculate an appropriate dpi value for each monitor + # using the resolution and physical size. This might be useful in setups + # where there are multiple screens with very different dpi values. + per_monitor_dpi = false + + +[urgency_low] + # IMPORTANT: colors have to be defined in quotation marks. + # Otherwise the "#" and following would be interpreted as a comment. + #background = "#000000" + #foreground = "#F8F8F2" + background = "#282a36" + foreground = "#6272a4" + frame_color = "#6272a4" + timeout = 10 + # Icon for notifications with low urgency, uncomment to enable + #default_icon = /path/to/icon + +[urgency_normal] + background = "#282a36" + foreground = "#bd93f9" + frame_color = "#bd93f9" + timeout = 10 + # Icon for notifications with normal urgency, uncomment to enable + #default_icon = /path/to/icon + +[urgency_critical] + # background = "#6F1515" + background = "#ff5555" + foreground = "#f8f8f2" + frame_color = "#f8f8f2" + timeout = 0 + # Icon for notifications with critical urgency, uncomment to enable + #default_icon = /path/to/icon + +# Every section that isn't one of the above is interpreted as a rules to +# override settings for certain messages. +# +# Messages can be matched by +# appname (discouraged, see desktop_entry) +# body +# category +# desktop_entry +# icon +# match_transient +# msg_urgency +# stack_tag +# summary +# +# and you can override the +# background +# foreground +# format +# frame_color +# fullscreen +# new_icon +# set_stack_tag +# set_transient +# set_category +# timeout +# urgency +# icon_position +# skip_display +# history_ignore +# action_name +# word_wrap +# ellipsize +# alignment +# hide_text +# +# Shell-like globbing will get expanded. +# +# Instead of the appname filter, it's recommended to use the desktop_entry filter. +# GLib based applications export their desktop-entry name. In comparison to the appname, +# the desktop-entry won't get localized. +# +# SCRIPTING +# You can specify a script that gets run when the rule matches by +# setting the "script" option. +# The script will be called as follows: +# script appname summary body icon urgency +# where urgency can be "LOW", "NORMAL" or "CRITICAL". +# +# NOTE: It might be helpful to run dunst -print in a terminal in order +# to find fitting options for rules. + +# Disable the transient hint so that idle_threshold cannot be bypassed from the +# client +#[transient_disable] +# match_transient = yes +# set_transient = no +# +# Make the handling of transient notifications more strict by making them not +# be placed in history. +#[transient_history_ignore] +# match_transient = yes +# history_ignore = yes + +# fullscreen values +# show: show the notifications, regardless if there is a fullscreen window opened +# delay: displays the new notification, if there is no fullscreen window active +# If the notification is already drawn, it won't get undrawn. +# pushback: same as delay, but when switching into fullscreen, the notification will get +# withdrawn from screen again and will get delayed like a new notification +#[fullscreen_delay_everything] +# fullscreen = delay +#[fullscreen_show_critical] +# msg_urgency = critical +# fullscreen = show + +#[espeak] +# summary = "*" +# script = dunst_espeak.sh + +#[script-test] +# summary = "*script*" +# script = dunst_test.sh + +#[ignore] +# # This notification will not be displayed +# summary = "foobar" +# skip_display = true + +#[history-ignore] +# # This notification will not be saved in history +# summary = "foobar" +# history_ignore = yes + +#[skip-display] +# # This notification will not be displayed, but will be included in the history +# summary = "foobar" +# skip_display = yes + +#[signed_on] +# appname = Pidgin +# summary = "*signed on*" +# urgency = low +# +#[signed_off] +# appname = Pidgin +# summary = *signed off* +# urgency = low +# +#[says] +# appname = Pidgin +# summary = *says* +# urgency = critical +# +#[twitter] +# appname = Pidgin +# summary = *twitter.com* +# urgency = normal +# +#[stack-volumes] +# appname = "some_volume_notifiers" +# set_stack_tag = "volume" +# +# vim: ft=cfg diff --git a/desktops/hyprland/etc/skel/config/fish/config.fish b/desktops/hyprland/etc/skel/config/fish/config.fish new file mode 100644 index 0000000..4ad0c33 --- /dev/null +++ b/desktops/hyprland/etc/skel/config/fish/config.fish @@ -0,0 +1,5 @@ +if status is-interactive + # Commands to run in interactive sessions can go here + set -g fish_greeting + starship init fish | source +end diff --git a/desktops/hyprland/etc/skel/config/fish/fish_variables b/desktops/hyprland/etc/skel/config/fish/fish_variables new file mode 100644 index 0000000..1a82b8a --- /dev/null +++ b/desktops/hyprland/etc/skel/config/fish/fish_variables @@ -0,0 +1,31 @@ +# This file contains fish universal variable definitions. +# VERSION: 3.0 +SETUVAR __fish_initialized:3400 +SETUVAR fish_color_autosuggestion:555\x1ebrblack +SETUVAR fish_color_cancel:\x2dr +SETUVAR fish_color_command:blue +SETUVAR fish_color_comment:red +SETUVAR fish_color_cwd:green +SETUVAR fish_color_cwd_root:red +SETUVAR fish_color_end:green +SETUVAR fish_color_error:brred +SETUVAR fish_color_escape:brcyan +SETUVAR fish_color_history_current:\x2d\x2dbold +SETUVAR fish_color_host:normal +SETUVAR fish_color_host_remote:yellow +SETUVAR fish_color_normal:normal +SETUVAR fish_color_operator:brcyan +SETUVAR fish_color_param:cyan +SETUVAR fish_color_quote:yellow +SETUVAR fish_color_redirection:cyan\x1e\x2d\x2dbold +SETUVAR fish_color_search_match:bryellow\x1e\x2d\x2dbackground\x3dbrblack +SETUVAR fish_color_selection:white\x1e\x2d\x2dbold\x1e\x2d\x2dbackground\x3dbrblack +SETUVAR fish_color_status:red +SETUVAR fish_color_user:brgreen +SETUVAR fish_color_valid_path:\x2d\x2dunderline +SETUVAR fish_key_bindings:fish_default_key_bindings +SETUVAR fish_pager_color_completion:normal +SETUVAR fish_pager_color_description:B3A06D\x1eyellow\x1e\x2di +SETUVAR fish_pager_color_prefix:normal\x1e\x2d\x2dbold\x1e\x2d\x2dunderline +SETUVAR fish_pager_color_progress:brwhite\x1e\x2d\x2dbackground\x3dcyan +SETUVAR fish_pager_color_selected_background:\x2dr diff --git a/desktops/hyprland/etc/skel/config/fish/themes/Dracula Official.theme b/desktops/hyprland/etc/skel/config/fish/themes/Dracula Official.theme new file mode 100644 index 0000000..6c1fd96 --- /dev/null +++ b/desktops/hyprland/etc/skel/config/fish/themes/Dracula Official.theme @@ -0,0 +1,55 @@ +# Dracula Color Palette +# +# Foreground: f8f8f2 +# Selection: 44475a +# Comment: 6272a4 +# Red: ff5555 +# Orange: ffb86c +# Yellow: f1fa8c +# Green: 50fa7b +# Purple: bd93f9 +# Cyan: 8be9fd +# Pink: ff79c6 + +# Syntax Highlighting Colors +fish_color_normal f8f8f2 +fish_color_command 8be9fd +fish_color_keyword ff79c6 +fish_color_quote f1fa8c +fish_color_redirection f8f8f2 +fish_color_end ffb86c +fish_color_error ff5555 +fish_color_param bd93f9 +fish_color_comment 6272a4 +fish_color_selection --background=44475a +fish_color_search_match --background=44475a +fish_color_operator 50fa7b +fish_color_escape ff79c6 +fish_color_autosuggestion 6272a4 +fish_color_cancel ff5555 --reverse +fish_color_option ffb86c +fish_color_history_current --bold +fish_color_status ff5555 +fish_color_valid_path --underline + +# Default Prompt Colors +fish_color_cwd 50fa7b +fish_color_cwd_root red +fish_color_host bd93f9 +fish_color_host_remote bd93f9 +fish_color_user 8be9fd + +# Completion Pager Colors +fish_pager_color_progress 6272a4 +fish_pager_color_background +fish_pager_color_prefix 8be9fd +fish_pager_color_completion f8f8f2 +fish_pager_color_description 6272a4 +fish_pager_color_selected_background --background=44475a +fish_pager_color_selected_prefix 8be9fd +fish_pager_color_selected_completion f8f8f2 +fish_pager_color_selected_description 6272a4 +fish_pager_color_secondary_background +fish_pager_color_secondary_prefix 8be9fd +fish_pager_color_secondary_completion f8f8f2 +fish_pager_color_secondary_description 6272a4 diff --git a/desktops/hyprland/etc/skel/config/hypr/hyprland.conf b/desktops/hyprland/etc/skel/config/hypr/hyprland.conf new file mode 100644 index 0000000..4899d2a --- /dev/null +++ b/desktops/hyprland/etc/skel/config/hypr/hyprland.conf @@ -0,0 +1,256 @@ + +######################################################################################## +AUTOGENERATED HYPR CONFIG. +PLEASE USE THE CONFIG PROVIDED IN THE GIT REPO /examples/hypr.conf AND EDIT IT, +OR EDIT THIS ONE ACCORDING TO THE WIKI INSTRUCTIONS. +######################################################################################## + +# +# Please note not all available settings / options are set here. +# For a full list, see the wiki +# + +autogenerated = 0 # remove this line to remove the warning + +# See https://wiki.hyprland.org/Configuring/Monitors/ +#monitor=eDP-1,1920x1080@60,0x0,1 + + +# See https://wiki.hyprland.org/Configuring/Keywords/ for more + +# Execute your favorite apps at launch +# exec-once = waybar & hyprpaper & firefox +exec-once = waybar +exec-once = dunst +exec-once = /usr/lib/polkit-kde-authentication-agent-1 +exec-once = wl-paste --type text --watch cliphist store +exec-once = wl-paste --type image --watch cliphist store +#exec-once = mpvpaper -o "no-audio --loop-playlist" eDP-1 ~/.wallpapers/video/ +exec-once = swaybg -i /usr/share/wallpapers/parch-wallpapers/W4.png -m fill +exec-once = gsettings set org.gnome.desktop.wm.preferences theme "Dracula" +exec-once = gsettings set org.gnome.desktop.interface gtk-theme "Dracula" +exec-once = gsettings set org.gnome.desktop.interface icon-theme "Papirus-Dark" +# Source a file (multi-file configs) +# source = ~/.config/hypr/myColors.conf + +# Some default env vars. +env = XCURSOR_SIZE,16 + +# For all categories, see https://wiki.hyprland.org/Configuring/Variables/ +input { + kb_layout = us,ir + kb_variant = + kb_model = + kb_options = grp:win_space_toggle + kb_rules = + + follow_mouse = 1 + + touchpad { + natural_scroll = no + } + + sensitivity = 0 # -1.0 - 1.0, 0 means no modification. +} + +general { + # See https://wiki.hyprland.org/Configuring/Variables/ for more + + gaps_in = 5 + gaps_out = 10 + border_size = 3 + # col.active_border = rgba(33ccffee) rgba(00ff99ee) 45deg + # col.inactive_border = rgba(595959aa) + layout = master +} + +decoration { + # See https://wiki.hyprland.org/Configuring/Variables/ for more + + rounding = 10 + + active_opacity = 1.0 + inactive_opacity = 1.0 + + blur { + enabled = false + size = 3 + passes = 1 + } + + # drop_shadow = yes + # shadow_range = 4 + # shadow_render_power = 3 + # col.shadow = rgba(1a1a1aee) +} + +misc { + disable_hyprland_logo = true + # disable_splash_rendering = true +} + +animations { + enabled = yes + + # Some default animations, see https://wiki.hyprland.org/Configuring/Animations/ for more + + bezier = myBezier, 0.05, 0.9, 0.1, 1.05 + + animation = windows, 1, 7, myBezier + animation = windowsOut, 1, 7, default, popin 80% + animation = border, 1, 10, default + animation = borderangle, 1, 8, default + animation = fade, 1, 7, default + animation = workspaces, 1, 6, default +} + +dwindle { + # See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more + pseudotile = yes # master switch for pseudotiling. Enabling is bound to mainMod + P in the keybinds section below + preserve_split = yes # you probably want this +} + +master { + # See https://wiki.hyprland.org/Configuring/Master-Layout/ for more + new_is_master = false +} + +gestures { + # See https://wiki.hyprland.org/Configuring/Variables/ for more + workspace_swipe = on + workspace_swipe_fingers = 3 + workspace_swipe_invert = true +} + +# Example per-device config +# See https://wiki.hyprland.org/Configuring/Keywords/#executing for more +device:epic-mouse-v1 { + sensitivity = -0.5 +} + +# Example windowrule v1 +# windowrule = float, ^(kitty)$ +# Example windowrule v2 +# windowrulev2 = float,class:^(kitty)$,title:^(kitty)$ + +windowrulev2 = float,class:org.kde.polkit-kde-authentication-agent-1 +# See https://wiki.hyprland.org/Configuring/Window-Rules/ for more + + +# See https://wiki.hyprland.org/Configuring/Keywords/ for more +$mainMod = SUPER + +# Example binds, see https://wiki.hyprland.org/Configuring/Binds/ for more +bind = $mainMod, Q, exec, kitty +bind = $mainMod, C, killactive, +bind = $mainMod SHIFT, ESCAPE, exit, +bind = $mainMod, E, exec, thunar +bind = $mainMod, V, togglefloating, +bind = $mainMod, R, exec, wofi +# bind = $mainMod, G, pseudo, # dwindle +# bind = $mainMod, J, togglesplit, # dwindle +bind = $mainMod, F, fullscreen, +bind = $mainMod SHIFT, T, layoutmsg, orientationtop # master +bind = $mainMod SHIFT, L, layoutmsg, orientationleft # master +bind = $mainMod SHIFT, M, layoutmsg, swapwithmaster master # master + +# Screenshot +bind = , Print, exec, grim -c - | convert - -shave 1x1 - | wl-copy && dunstify "screenshot was taken." +bind = SHIFT, Print, exec, grim -g "$(slurp)" - | convert - -shave 1x1 - | swappy -f - + +# Screencast +bind = $mainMod, Print, exec, dunstify "recording..." && mkdir -p ~/Video/Screencast/ && wf-recorder -f ~/Video/Screencast/wf-recorder_$(date +"%Y-%m-%d_%H:%M:%S.mp4") --audio="merge-io.monitor" -c h264_vaapi -C aac -d /dev/dri/renderD128 +bind = $mainMod SHIFT, Print, exec, mkdir -p ~/Video/Screencast/ && wf-recorder -f ~/Video/Screencast/wf-recorder_$(date +"%Y-%m-%d_%H:%M:%S.mp4") --audio="merge-io.monitor" -c h264_vaapi -C aac -d /dev/dri/renderD128 -g "$(slurp)" +bind = $mainMod SHIFT, BackSpace, exec,killall -s SIGINT wf-recorder && dunstify "wf-recorder paused." + +# Screen brightness +bind = , XF86MonBrightnessUp, exec, brightnessctl s +10% +bind = , XF86MonBrightnessDown, exec, brightnessctl s 10%- + +# Volume +bind = , XF86AudioRaiseVolume, exec, wpctl set-volume -l 1 @DEFAULT_AUDIO_SINK@ 5%+ +bind = , XF86AudioLowerVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%- +bind = , XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle +bind = , XF86AudioMicMute, exec, wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle + +bind = , XF86AudioPlay, exec, playerctl play-pause +bind = , XF86AudioPause, exec, playerctl play-pause +bind = , XF86AudioNext, exec, playerctl next +bind = , XF86AudioPrev, exec, playerctl previous + +# Clipboard +bind = SUPER, P, exec, cliphist list | wofi --dmenu | cliphist decode | wl-copy + +# Idle +bind = SUPER, L, exec, swaylock + +# Move focus with mainMod + arrow keys +bind = $mainMod, left, movefocus, l +bind = $mainMod, right, movefocus, r +bind = $mainMod, up, movefocus, u +bind = $mainMod, down, movefocus, d + +# Switch workspaces with mainMod + [0-9] +bind = $mainMod, 1, workspace, 1 +bind = $mainMod, 2, workspace, 2 +bind = $mainMod, 3, workspace, 3 +bind = $mainMod, 4, workspace, 4 +bind = $mainMod, 5, workspace, 5 +bind = $mainMod, 6, workspace, 6 +bind = $mainMod, 7, workspace, 7 +bind = $mainMod, 8, workspace, 8 +bind = $mainMod, 9, workspace, 9 +bind = $mainMod, 0, workspace, 10 + +# Move active window to a workspace with mainMod + SHIFT + [0-9] +bind = $mainMod SHIFT, 1, movetoworkspace, 1 +bind = $mainMod SHIFT, 2, movetoworkspace, 2 +bind = $mainMod SHIFT, 3, movetoworkspace, 3 +bind = $mainMod SHIFT, 4, movetoworkspace, 4 +bind = $mainMod SHIFT, 5, movetoworkspace, 5 +bind = $mainMod SHIFT, 6, movetoworkspace, 6 +bind = $mainMod SHIFT, 7, movetoworkspace, 7 +bind = $mainMod SHIFT, 8, movetoworkspace, 8 +bind = $mainMod SHIFT, 9, movetoworkspace, 9 +bind = $mainMod SHIFT, 0, movetoworkspace, 10 + +# Scroll through existing workspaces with mainMod + scroll +bind = $mainMod, mouse_down, workspace, e+1 +bind = $mainMod, mouse_up, workspace, e-1 + +# Move/resize windows with mainMod + LMB/RMB and dragging +bindm = $mainMod, mouse:272, movewindow +bindm = $mainMod, mouse:273, resizewindow + +# dracula/hyprland +general { + # col.active_border = rgb(44475a) rgb(bd93f9) 90deg + # col.inactive_border = rgba(44475aaa) + col.active_border = rgb(f1fa8c) + col.inactive_border = rgb(282a36) + # col.inactive_border = rgba(1e1f29eb) + #col.group_border = rgba(282a36dd) + #col.group_border_active = rgb(bd93f9) rgb(44475a) 90deg + # non-gradient alternative + #col.active_border = rgb(bd93f9) + #col.inactive_border = rgba(44475aaa) + #col.group_border = rgba(282a36dd) + #col.group_border_active = rgb(bd93f9) + # darker alternative + #col.active_border = rgb(44475a) # or rgb(6272a4) + #col.inactive_border = rgb(282a36) + #col.group_border = rgb(282a36) + #col.group_border_active = rgb(44475a) # or rgb(6272a4) + +} +decoration { + # col.shadow = rgba(1E202966) + col.shadow = rgb(1e1f29) + # suggested shadow setting + drop_shadow = yes + shadow_range = 30 + shadow_offset = 1 1 + shadow_render_power = 3 + shadow_scale = 0.97 +} +windowrulev2 = bordercolor rgb(ff5555),xwayland:1 # check if window is xwayland diff --git a/desktops/hyprland/etc/skel/config/kitty/diff.conf b/desktops/hyprland/etc/skel/config/kitty/diff.conf new file mode 100644 index 0000000..5fec447 --- /dev/null +++ b/desktops/hyprland/etc/skel/config/kitty/diff.conf @@ -0,0 +1,19 @@ +foreground #f8f8f2 +background #282a36 +title_fg #f8f8f2 +title_bg #282a36 +margin_bg #6272a4 +margin_fg #44475a +removed_bg #ff5555 +highlight_removed_bg #ff5555 +removed_margin_bg #ff5555 +added_bg #50fa7b +highlight_added_bg #50fa7b +added_margin_bg #50fa7b +filler_bg #44475a +hunk_margin_bg #44475a +hunk_bg #bd93f9 +search_bg #8be9fd +search_fg #282a36 +select_bg #f1fa8c +select_fg #282a36 diff --git a/desktops/hyprland/etc/skel/config/kitty/dracula.conf b/desktops/hyprland/etc/skel/config/kitty/dracula.conf new file mode 100644 index 0000000..8f05c52 --- /dev/null +++ b/desktops/hyprland/etc/skel/config/kitty/dracula.conf @@ -0,0 +1,66 @@ +# https://draculatheme.com/kitty +# +# Installation instructions: +# +# cp dracula.conf ~/.config/kitty/ +# echo "include dracula.conf" >> ~/.config/kitty/kitty.conf +# +# Then reload kitty for the config to take affect. +# Alternatively copy paste below directly into kitty.conf + +foreground #f8f8f2 +background #282a36 +selection_foreground #ffffff +selection_background #44475a + +url_color #8be9fd + +# black +color0 #21222c +color8 #6272a4 + +# red +color1 #ff5555 +color9 #ff6e6e + +# green +color2 #50fa7b +color10 #69ff94 + +# yellow +color3 #f1fa8c +color11 #ffffa5 + +# blue +color4 #bd93f9 +color12 #d6acff + +# magenta +color5 #ff79c6 +color13 #ff92df + +# cyan +color6 #8be9fd +color14 #a4ffff + +# white +color7 #f8f8f2 +color15 #ffffff + +# Cursor colors +cursor #f8f8f2 +cursor_text_color background + +# Tab bar colors +active_tab_foreground #282a36 +active_tab_background #f8f8f2 +inactive_tab_foreground #282a36 +inactive_tab_background #6272a4 + +# Marks +mark1_foreground #282a36 +mark1_background #ff5555 + +# Splits/Windows +active_border_color #f8f8f2 +inactive_border_color #6272a4 diff --git a/desktops/hyprland/etc/skel/config/kitty/kitty.conf b/desktops/hyprland/etc/skel/config/kitty/kitty.conf new file mode 100644 index 0000000..03321a0 --- /dev/null +++ b/desktops/hyprland/etc/skel/config/kitty/kitty.conf @@ -0,0 +1,2455 @@ +# vim:fileencoding=utf-8:foldmethod=marker + +#: Fonts {{{ + +#: kitty has very powerful font management. You can configure +#: individual font faces and even specify special fonts for particular +#: characters. + +font_family FiraCode +bold_font auto +italic_font auto +bold_italic_font auto + +#: You can specify different fonts for the bold/italic/bold-italic +#: variants. To get a full list of supported fonts use the `kitty +#: +list-fonts` command. By default they are derived automatically, by +#: the OSes font system. When bold_font or bold_italic_font is set to +#: auto on macOS, the priority of bold fonts is semi-bold, bold, +#: heavy. Setting them manually is useful for font families that have +#: many weight variants like Book, Medium, Thick, etc. For example:: + +#: font_family Operator Mono Book +#: bold_font Operator Mono Medium +#: italic_font Operator Mono Book Italic +#: bold_italic_font Operator Mono Medium Italic + +font_size 12 + +#: Font size (in pts) + +# force_ltr no + +#: kitty does not support BIDI (bidirectional text), however, for RTL +#: scripts, words are automatically displayed in RTL. That is to say, +#: in an RTL script, the words "HELLO WORLD" display in kitty as +#: "WORLD HELLO", and if you try to select a substring of an RTL- +#: shaped string, you will get the character that would be there had +#: the string been LTR. For example, assuming the Hebrew word ירושלים, +#: selecting the character that on the screen appears to be ם actually +#: writes into the selection buffer the character י. kitty's default +#: behavior is useful in conjunction with a filter to reverse the word +#: order, however, if you wish to manipulate RTL glyphs, it can be +#: very challenging to work with, so this option is provided to turn +#: it off. Furthermore, this option can be used with the command line +#: program GNU FriBidi +#: to get BIDI support, because it will force kitty to always treat +#: the text as LTR, which FriBidi expects for terminals. + +# symbol_map + +#: E.g. symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols + +#: Map the specified Unicode codepoints to a particular font. Useful +#: if you need special rendering for some symbols, such as for +#: Powerline. Avoids the need for patched fonts. Each Unicode code +#: point is specified in the form `U+`. You +#: can specify multiple code points, separated by commas and ranges +#: separated by hyphens. This option can be specified multiple times. +#: The syntax is:: + +#: symbol_map codepoints Font Family Name + +# narrow_symbols + +#: E.g. narrow_symbols U+E0A0-U+E0A3,U+E0C0-U+E0C7 1 + +#: Usually, for Private Use Unicode characters and some symbol/dingbat +#: characters, if the character is followed by one or more spaces, +#: kitty will use those extra cells to render the character larger, if +#: the character in the font has a wide aspect ratio. Using this +#: option you can force kitty to restrict the specified code points to +#: render in the specified number of cells (defaulting to one cell). +#: This option can be specified multiple times. The syntax is:: + +#: narrow_symbols codepoints [optionally the number of cells] + +# disable_ligatures never + +#: Choose how you want to handle multi-character ligatures. The +#: default is to always render them. You can tell kitty to not render +#: them when the cursor is over them by using cursor to make editing +#: easier, or have kitty never render them at all by using always, if +#: you don't like them. The ligature strategy can be set per-window +#: either using the kitty remote control facility or by defining +#: shortcuts for it in kitty.conf, for example:: + +#: map alt+1 disable_ligatures_in active always +#: map alt+2 disable_ligatures_in all never +#: map alt+3 disable_ligatures_in tab cursor + +#: Note that this refers to programming ligatures, typically +#: implemented using the calt OpenType feature. For disabling general +#: ligatures, use the font_features option. + +# font_features + +#: E.g. font_features none + +#: Choose exactly which OpenType features to enable or disable. This +#: is useful as some fonts might have features worthwhile in a +#: terminal. For example, Fira Code includes a discretionary feature, +#: zero, which in that font changes the appearance of the zero (0), to +#: make it more easily distinguishable from Ø. Fira Code also includes +#: other discretionary features known as Stylistic Sets which have the +#: tags ss01 through ss20. + +#: For the exact syntax to use for individual features, see the +#: HarfBuzz documentation . + +#: Note that this code is indexed by PostScript name, and not the font +#: family. This allows you to define very precise feature settings; +#: e.g. you can disable a feature in the italic font but not in the +#: regular font. + +#: On Linux, font features are first read from the FontConfig database +#: and then this option is applied, so they can be configured in a +#: single, central place. + +#: To get the PostScript name for a font, use `kitty +list-fonts +#: --psnames`: + +#: .. code-block:: sh + +#: $ kitty +list-fonts --psnames | grep Fira +#: Fira Code +#: Fira Code Bold (FiraCode-Bold) +#: Fira Code Light (FiraCode-Light) +#: Fira Code Medium (FiraCode-Medium) +#: Fira Code Regular (FiraCode-Regular) +#: Fira Code Retina (FiraCode-Retina) + +#: The part in brackets is the PostScript name. + +#: Enable alternate zero and oldstyle numerals:: + +#: font_features FiraCode-Retina +zero +onum + +#: Enable only alternate zero in the bold font:: + +#: font_features FiraCode-Bold +zero + +#: Disable the normal ligatures, but keep the calt feature which (in +#: this font) breaks up monotony:: + +#: font_features TT2020StyleB-Regular -liga +calt + +#: In conjunction with force_ltr, you may want to disable Arabic +#: shaping entirely, and only look at their isolated forms if they +#: show up in a document. You can do this with e.g.:: + +#: font_features UnifontMedium +isol -medi -fina -init + +# modify_font + +#: Modify font characteristics such as the position or thickness of +#: the underline and strikethrough. The modifications can have the +#: suffix px for pixels or % for percentage of original value. No +#: suffix means use pts. For example:: + +#: modify_font underline_position -2 +#: modify_font underline_thickness 150% +#: modify_font strikethrough_position 2px + +#: Additionally, you can modify the size of the cell in which each +#: font glyph is rendered and the baseline at which the glyph is +#: placed in the cell. For example:: + +#: modify_font cell_width 80% +#: modify_font cell_height -2px +#: modify_font baseline 3 + +#: Note that modifying the baseline will automatically adjust the +#: underline and strikethrough positions by the same amount. +#: Increasing the baseline raises glyphs inside the cell and +#: decreasing it lowers them. Decreasing the cell size might cause +#: rendering artifacts, so use with care. + +# box_drawing_scale 0.001, 1, 1.5, 2 + +#: The sizes of the lines used for the box drawing Unicode characters. +#: These values are in pts. They will be scaled by the monitor DPI to +#: arrive at a pixel value. There must be four values corresponding to +#: thin, normal, thick, and very thick lines. + +# undercurl_style thin-sparse + +#: The style with which undercurls are rendered. This option takes the +#: form (thin|thick)-(sparse|dense). Thin and thick control the +#: thickness of the undercurl. Sparse and dense control how often the +#: curl oscillates. With sparse the curl will peak once per character, +#: with dense twice. + +# text_composition_strategy platform + +#: Control how kitty composites text glyphs onto the background color. +#: The default value of platform tries for text rendering as close to +#: "native" for the platform kitty is running on as possible. + +#: A value of legacy uses the old (pre kitty 0.28) strategy for how +#: glyphs are composited. This will make dark text on light +#: backgrounds look thicker and light text on dark backgrounds +#: thinner. It might also make some text appear like the strokes are +#: uneven. + +#: You can fine tune the actual contrast curve used for glyph +#: composition by specifying up to two space-separated numbers for +#: this setting. + +#: The first number is the gamma adjustment, which controls the +#: thickness of dark text on light backgrounds. Increasing the value +#: will make text appear thicker. The default value for this is 1.0 on +#: Linux and 1.7 on macOS. Valid values are 0.01 and above. The result +#: is scaled based on the luminance difference between the background +#: and the foreground. Dark text on light backgrounds receives the +#: full impact of the curve while light text on dark backgrounds is +#: affected very little. + +#: The second number is an additional multiplicative contrast. It is +#: percentage ranging from 0 to 100. The default value is 0 on Linux +#: and 30 on macOS. + +#: If you wish to achieve similar looking thickness in light and dark +#: themes, a good way to experiment is start by setting the value to +#: 1.0 0 and use a dark theme. Then adjust the second parameter until +#: it looks good. Then switch to a light theme and adjust the first +#: parameter until the perceived thickness matches the dark theme. + +# text_fg_override_threshold 0 + +#: The minimum accepted difference in luminance between the foreground +#: and background color, below which kitty will override the +#: foreground color. It is percentage ranging from 0 to 100. If the +#: difference in luminance of the foreground and background is below +#: this threshold, the foreground color will be set to white if the +#: background is dark or black if the background is light. The default +#: value is 0, which means no overriding is performed. Useful when +#: working with applications that use colors that do not contrast well +#: with your preferred color scheme. + +#: WARNING: Some programs use characters (such as block characters) +#: for graphics display and may expect to be able to set the +#: foreground and background to the same color (or similar colors). +#: If you see unexpected stripes, dots, lines, incorrect color, no +#: color where you expect color, or any kind of graphic display +#: problem try setting text_fg_override_threshold to 0 to see if this +#: is the cause of the problem. + +#: }}} + +#: Cursor customization {{{ + +# cursor #cccccc + +#: Default cursor color. If set to the special value none the cursor +#: will be rendered with a "reverse video" effect. It's color will be +#: the color of the text in the cell it is over and the text will be +#: rendered with the background color of the cell. Note that if the +#: program running in the terminal sets a cursor color, this takes +#: precedence. Also, the cursor colors are modified if the cell +#: background and foreground colors have very low contrast. + +# cursor_text_color #111111 + +#: The color of text under the cursor. If you want it rendered with +#: the background color of the cell underneath instead, use the +#: special keyword: background. Note that if cursor is set to none +#: then this option is ignored. + +# cursor_shape block + +#: The cursor shape can be one of block, beam, underline. Note that +#: when reloading the config this will be changed only if the cursor +#: shape has not been set by the program running in the terminal. This +#: sets the default cursor shape, applications running in the terminal +#: can override it. In particular, shell integration +#: in kitty sets +#: the cursor shape to beam at shell prompts. You can avoid this by +#: setting shell_integration to no-cursor. + +# cursor_beam_thickness 1.5 + +#: The thickness of the beam cursor (in pts). + +# cursor_underline_thickness 2.0 + +#: The thickness of the underline cursor (in pts). + +# cursor_blink_interval -1 + +#: The interval to blink the cursor (in seconds). Set to zero to +#: disable blinking. Negative values mean use system default. Note +#: that the minimum interval will be limited to repaint_delay. + +# cursor_stop_blinking_after 15.0 + +#: Stop blinking cursor after the specified number of seconds of +#: keyboard inactivity. Set to zero to never stop blinking. + +#: }}} + +#: Scrollback {{{ + +# scrollback_lines 2000 + +#: Number of lines of history to keep in memory for scrolling back. +#: Memory is allocated on demand. Negative numbers are (effectively) +#: infinite scrollback. Note that using very large scrollback is not +#: recommended as it can slow down performance of the terminal and +#: also use large amounts of RAM. Instead, consider using +#: scrollback_pager_history_size. Note that on config reload if this +#: is changed it will only affect newly created windows, not existing +#: ones. + +# scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER + +#: Program with which to view scrollback in a new window. The +#: scrollback buffer is passed as STDIN to this program. If you change +#: it, make sure the program you use can handle ANSI escape sequences +#: for colors and text formatting. INPUT_LINE_NUMBER in the command +#: line above will be replaced by an integer representing which line +#: should be at the top of the screen. Similarly CURSOR_LINE and +#: CURSOR_COLUMN will be replaced by the current cursor position or +#: set to 0 if there is no cursor, for example, when showing the last +#: command output. + +# scrollback_pager_history_size 0 + +#: Separate scrollback history size (in MB), used only for browsing +#: the scrollback buffer with pager. This separate buffer is not +#: available for interactive scrolling but will be piped to the pager +#: program when viewing scrollback buffer in a separate window. The +#: current implementation stores the data in UTF-8, so approximately +#: 10000 lines per megabyte at 100 chars per line, for pure ASCII, +#: unformatted text. A value of zero or less disables this feature. +#: The maximum allowed size is 4GB. Note that on config reload if this +#: is changed it will only affect newly created windows, not existing +#: ones. + +# scrollback_fill_enlarged_window no + +#: Fill new space with lines from the scrollback buffer after +#: enlarging a window. + +# wheel_scroll_multiplier 5.0 + +#: Multiplier for the number of lines scrolled by the mouse wheel. +#: Note that this is only used for low precision scrolling devices, +#: not for high precision scrolling devices on platforms such as macOS +#: and Wayland. Use negative numbers to change scroll direction. See +#: also wheel_scroll_min_lines. + +# wheel_scroll_min_lines 1 + +#: The minimum number of lines scrolled by the mouse wheel. The scroll +#: multiplier wheel_scroll_multiplier only takes effect after it +#: reaches this number. Note that this is only used for low precision +#: scrolling devices like wheel mice that scroll by very small amounts +#: when using the wheel. With a negative number, the minimum number of +#: lines will always be added. + +# touch_scroll_multiplier 1.0 + +#: Multiplier for the number of lines scrolled by a touchpad. Note +#: that this is only used for high precision scrolling devices on +#: platforms such as macOS and Wayland. Use negative numbers to change +#: scroll direction. + +#: }}} + +#: Mouse {{{ + +# mouse_hide_wait 3.0 + +#: Hide mouse cursor after the specified number of seconds of the +#: mouse not being used. Set to zero to disable mouse cursor hiding. +#: Set to a negative value to hide the mouse cursor immediately when +#: typing text. Disabled by default on macOS as getting it to work +#: robustly with the ever-changing sea of bugs that is Cocoa is too +#: much effort. + +# url_color #0087bd +# url_style curly + +#: The color and style for highlighting URLs on mouse-over. url_style +#: can be one of: none, straight, double, curly, dotted, dashed. + +# open_url_with default + +#: The program to open clicked URLs. The special value default with +#: first look for any URL handlers defined via the open_actions +#: facility and if non +#: are found, it will use the Operating System's default URL handler +#: (open on macOS and xdg-open on Linux). + +# url_prefixes file ftp ftps gemini git gopher http https irc ircs kitty mailto news sftp ssh + +#: The set of URL prefixes to look for when detecting a URL under the +#: mouse cursor. + +# detect_urls yes + +#: Detect URLs under the mouse. Detected URLs are highlighted with an +#: underline and the mouse cursor becomes a hand over them. Even if +#: this option is disabled, URLs are still clickable. See also the +#: underline_hyperlinks option to control how hyperlinks (as opposed +#: to plain text URLs) are displayed. + +# url_excluded_characters + +#: Additional characters to be disallowed from URLs, when detecting +#: URLs under the mouse cursor. By default, all characters that are +#: legal in URLs are allowed. Additionally, newlines are allowed (but +#: stripped). This is to accommodate programs such as mutt that add +#: hard line breaks even for continued lines. \n can be added to this +#: option to disable this behavior. Special characters can be +#: specified using backslash escapes, to specify a backslash use a +#: double backslash. + +# show_hyperlink_targets no + +#: When the mouse hovers over a terminal hyperlink, show the actual +#: URL that will be activated when the hyperlink is clicked. + +# underline_hyperlinks hover + +#: Control how hyperlinks are underlined. They can either be +#: underlined on mouse hover, always (i.e. permanently underlined) or +#: never which means that kitty will not apply any underline styling +#: to hyperlinks. Uses the url_style and url_color settings for the +#: underline style. Note that reloading the config and changing this +#: value to/from always will only affect text subsequently received by +#: kitty. + +# copy_on_select no + +#: Copy to clipboard or a private buffer on select. With this set to +#: clipboard, selecting text with the mouse will cause the text to be +#: copied to clipboard. Useful on platforms such as macOS that do not +#: have the concept of primary selection. You can instead specify a +#: name such as a1 to copy to a private kitty buffer. Map a shortcut +#: with the paste_from_buffer action to paste from this private +#: buffer. For example:: + +#: copy_on_select a1 +#: map shift+cmd+v paste_from_buffer a1 + +#: Note that copying to the clipboard is a security risk, as all +#: programs, including websites open in your browser can read the +#: contents of the system clipboard. + +# paste_actions quote-urls-at-prompt,confirm + +#: A comma separated list of actions to take when pasting text into +#: the terminal. The supported paste actions are: + +#: quote-urls-at-prompt: +#: If the text being pasted is a URL and the cursor is at a shell prompt, +#: automatically quote the URL (needs shell_integration). +#: replace-dangerous-control-codes +#: Replace dangerous control codes from pasted text, without confirmation. +#: replace-newline +#: Replace the newline character from pasted text, without confirmation. +#: confirm: +#: Confirm the paste if the text to be pasted contains any terminal control codes +#: as this can be dangerous, leading to code execution if the shell/program running +#: in the terminal does not properly handle these. +#: confirm-if-large +#: Confirm the paste if it is very large (larger than 16KB) as pasting +#: large amounts of text into shells can be very slow. +#: filter: +#: Run the filter_paste() function from the file paste-actions.py in +#: the kitty config directory on the pasted text. The text returned by the +#: function will be actually pasted. + +# strip_trailing_spaces never + +#: Remove spaces at the end of lines when copying to clipboard. A +#: value of smart will do it when using normal selections, but not +#: rectangle selections. A value of always will always do it. + +# select_by_word_characters @-./_~?&=%+# + +#: Characters considered part of a word when double clicking. In +#: addition to these characters any character that is marked as an +#: alphanumeric character in the Unicode database will be matched. + +# select_by_word_characters_forward + +#: Characters considered part of a word when extending the selection +#: forward on double clicking. In addition to these characters any +#: character that is marked as an alphanumeric character in the +#: Unicode database will be matched. + +#: If empty (default) select_by_word_characters will be used for both +#: directions. + +# click_interval -1.0 + +#: The interval between successive clicks to detect double/triple +#: clicks (in seconds). Negative numbers will use the system default +#: instead, if available, or fallback to 0.5. + +# focus_follows_mouse no + +#: Set the active window to the window under the mouse when moving the +#: mouse around. On macOS, this will also cause the OS Window under +#: the mouse to be focused automatically when the mouse enters it. + +# pointer_shape_when_grabbed arrow + +#: The shape of the mouse pointer when the program running in the +#: terminal grabs the mouse. + +# default_pointer_shape beam + +#: The default shape of the mouse pointer. + +# pointer_shape_when_dragging beam + +#: The default shape of the mouse pointer when dragging across text. + +#: Mouse actions {{{ + +#: Mouse buttons can be mapped to perform arbitrary actions. The +#: syntax is: + +#: .. code-block:: none + +#: mouse_map button-name event-type modes action + +#: Where button-name is one of left, middle, right, b1 ... b8 with +#: added keyboard modifiers. For example: ctrl+shift+left refers to +#: holding the Ctrl+Shift keys while clicking with the left mouse +#: button. The value b1 ... b8 can be used to refer to up to eight +#: buttons on a mouse. + +#: event-type is one of press, release, doublepress, triplepress, +#: click, doubleclick. modes indicates whether the action is performed +#: when the mouse is grabbed by the program running in the terminal, +#: or not. The values are grabbed or ungrabbed or a comma separated +#: combination of them. grabbed refers to when the program running in +#: the terminal has requested mouse events. Note that the click and +#: double click events have a delay of click_interval to disambiguate +#: from double and triple presses. + +#: You can run kitty with the kitty --debug-input command line option +#: to see mouse events. See the builtin actions below to get a sense +#: of what is possible. + +#: If you want to unmap an action, map it to no_op. For example, to +#: disable opening of URLs with a plain click:: + +#: mouse_map left click ungrabbed no_op + +#: See all the mappable actions including mouse actions here +#: . + +#: .. note:: +#: Once a selection is started, releasing the button that started it will +#: automatically end it and no release event will be dispatched. + +# clear_all_mouse_actions no + +#: Remove all mouse action definitions up to this point. Useful, for +#: instance, to remove the default mouse actions. + +#: Click the link under the mouse or move the cursor + +# mouse_map left click ungrabbed mouse_handle_click selection link prompt + +#:: First check for a selection and if one exists do nothing. Then +#:: check for a link under the mouse cursor and if one exists, click +#:: it. Finally check if the click happened at the current shell +#:: prompt and if so, move the cursor to the click location. Note +#:: that this requires shell integration +#:: to work. + +#: Click the link under the mouse or move the cursor even when grabbed + +# mouse_map shift+left click grabbed,ungrabbed mouse_handle_click selection link prompt + +#:: Same as above, except that the action is performed even when the +#:: mouse is grabbed by the program running in the terminal. + +#: Click the link under the mouse cursor + +# mouse_map ctrl+shift+left release grabbed,ungrabbed mouse_handle_click link + +#:: Variant with Ctrl+Shift is present because the simple click based +#:: version has an unavoidable delay of click_interval, to +#:: disambiguate clicks from double clicks. + +#: Discard press event for link click + +# mouse_map ctrl+shift+left press grabbed discard_event + +#:: Prevent this press event from being sent to the program that has +#:: grabbed the mouse, as the corresponding release event is used to +#:: open a URL. + +#: Paste from the primary selection + +# mouse_map middle release ungrabbed paste_from_selection + +#: Start selecting text + +# mouse_map left press ungrabbed mouse_selection normal + +#: Start selecting text in a rectangle + +# mouse_map ctrl+alt+left press ungrabbed mouse_selection rectangle + +#: Select a word + +# mouse_map left doublepress ungrabbed mouse_selection word + +#: Select a line + +# mouse_map left triplepress ungrabbed mouse_selection line + +#: Select line from point + +# mouse_map ctrl+alt+left triplepress ungrabbed mouse_selection line_from_point + +#:: Select from the clicked point to the end of the line. If you +#:: would like to select the word at the point and then extend to the +#:: rest of the line, change line_from_point to +#:: word_and_line_from_point. + +#: Extend the current selection + +# mouse_map right press ungrabbed mouse_selection extend + +#:: If you want only the end of the selection to be moved instead of +#:: the nearest boundary, use move-end instead of extend. + +#: Paste from the primary selection even when grabbed + +# mouse_map shift+middle release ungrabbed,grabbed paste_selection +# mouse_map shift+middle press grabbed discard_event + +#: Start selecting text even when grabbed + +# mouse_map shift+left press ungrabbed,grabbed mouse_selection normal + +#: Start selecting text in a rectangle even when grabbed + +# mouse_map ctrl+shift+alt+left press ungrabbed,grabbed mouse_selection rectangle + +#: Select a word even when grabbed + +# mouse_map shift+left doublepress ungrabbed,grabbed mouse_selection word + +#: Select a line even when grabbed + +# mouse_map shift+left triplepress ungrabbed,grabbed mouse_selection line + +#: Select line from point even when grabbed + +# mouse_map ctrl+shift+alt+left triplepress ungrabbed,grabbed mouse_selection line_from_point + +#:: Select from the clicked point to the end of the line even when +#:: grabbed. If you would like to select the word at the point and +#:: then extend to the rest of the line, change line_from_point to +#:: word_and_line_from_point. + +#: Extend the current selection even when grabbed + +# mouse_map shift+right press ungrabbed,grabbed mouse_selection extend + +#: Show clicked command output in pager + +# mouse_map ctrl+shift+right press ungrabbed mouse_show_command_output + +#:: Requires shell integration +#:: to work. + +#: }}} + +#: }}} + +#: Performance tuning {{{ + +# repaint_delay 10 + +#: Delay between screen updates (in milliseconds). Decreasing it, +#: increases frames-per-second (FPS) at the cost of more CPU usage. +#: The default value yields ~100 FPS which is more than sufficient for +#: most uses. Note that to actually achieve 100 FPS, you have to +#: either set sync_to_monitor to no or use a monitor with a high +#: refresh rate. Also, to minimize latency when there is pending input +#: to be processed, this option is ignored. + +# input_delay 3 + +#: Delay before input from the program running in the terminal is +#: processed (in milliseconds). Note that decreasing it will increase +#: responsiveness, but also increase CPU usage and might cause flicker +#: in full screen programs that redraw the entire screen on each loop, +#: because kitty is so fast that partial screen updates will be drawn. + +# sync_to_monitor yes + +#: Sync screen updates to the refresh rate of the monitor. This +#: prevents screen tearing +#: when scrolling. +#: However, it limits the rendering speed to the refresh rate of your +#: monitor. With a very high speed mouse/high keyboard repeat rate, +#: you may notice some slight input latency. If so, set this to no. + +#: }}} + +#: Terminal bell {{{ + +# enable_audio_bell yes + +#: The audio bell. Useful to disable it in environments that require +#: silence. + +# visual_bell_duration 0.0 + +#: The visual bell duration (in seconds). Flash the screen when a bell +#: occurs for the specified number of seconds. Set to zero to disable. + +# visual_bell_color none + +#: The color used by visual bell. Set to none will fall back to +#: selection background color. If you feel that the visual bell is too +#: bright, you can set it to a darker color. + +# window_alert_on_bell yes + +#: Request window attention on bell. Makes the dock icon bounce on +#: macOS or the taskbar flash on linux. + +# bell_on_tab "🔔 " + +#: Some text or a Unicode symbol to show on the tab if a window in the +#: tab that does not have focus has a bell. If you want to use leading +#: or trailing spaces, surround the text with quotes. See +#: tab_title_template for how this is rendered. + +#: For backwards compatibility, values of yes, y and true are +#: converted to the default bell symbol and no, n, false and none are +#: converted to the empty string. + +# command_on_bell none + +#: Program to run when a bell occurs. The environment variable +#: KITTY_CHILD_CMDLINE can be used to get the program running in the +#: window in which the bell occurred. + +# bell_path none + +#: Path to a sound file to play as the bell sound. If set to none, the +#: system default bell sound is used. Must be in a format supported by +#: the operating systems sound API, such as WAV or OGA on Linux +#: (libcanberra) or AIFF, MP3 or WAV on macOS (NSSound) + +# linux_bell_theme __custom + +#: The XDG Sound Theme kitty will use to play the bell sound. Defaults +#: to the custom theme name used by GNOME and Budgie, falling back to +#: the default freedesktop theme if it does not exist. This option may +#: be removed if Linux ever provides desktop-agnostic support for +#: setting system sound themes. + +#: }}} + +#: Window layout {{{ + +# remember_window_size yes +# initial_window_width 640 +# initial_window_height 400 + +#: If enabled, the OS Window size will be remembered so that new +#: instances of kitty will have the same size as the previous +#: instance. If disabled, the OS Window will initially have size +#: configured by initial_window_width/height, in pixels. You can use a +#: suffix of "c" on the width/height values to have them interpreted +#: as number of cells instead of pixels. + +# enabled_layouts * + +#: The enabled window layouts. A comma separated list of layout names. +#: The special value all means all layouts. The first listed layout +#: will be used as the startup layout. Default configuration is all +#: layouts in alphabetical order. For a list of available layouts, see +#: the layouts . + +# window_resize_step_cells 2 +# window_resize_step_lines 2 + +#: The step size (in units of cell width/cell height) to use when +#: resizing kitty windows in a layout with the shortcut +#: start_resizing_window. The cells value is used for horizontal +#: resizing, and the lines value is used for vertical resizing. + +# window_border_width 0.5pt + +#: The width of window borders. Can be either in pixels (px) or pts +#: (pt). Values in pts will be rounded to the nearest number of pixels +#: based on screen resolution. If not specified, the unit is assumed +#: to be pts. Note that borders are displayed only when more than one +#: window is visible. They are meant to separate multiple windows. + +# draw_minimal_borders yes + +#: Draw only the minimum borders needed. This means that only the +#: borders that separate the window from a neighbor are drawn. Note +#: that setting a non-zero window_margin_width overrides this and +#: causes all borders to be drawn. + +# window_margin_width 0 + +#: The window margin (in pts) (blank area outside the border). A +#: single value sets all four sides. Two values set the vertical and +#: horizontal sides. Three values set top, horizontal and bottom. Four +#: values set top, right, bottom and left. + +# single_window_margin_width -1 + +#: The window margin to use when only a single window is visible (in +#: pts). Negative values will cause the value of window_margin_width +#: to be used instead. A single value sets all four sides. Two values +#: set the vertical and horizontal sides. Three values set top, +#: horizontal and bottom. Four values set top, right, bottom and left. + +# window_padding_width 0 + +#: The window padding (in pts) (blank area between the text and the +#: window border). A single value sets all four sides. Two values set +#: the vertical and horizontal sides. Three values set top, horizontal +#: and bottom. Four values set top, right, bottom and left. + +# single_window_padding_width -1 + +#: The window padding to use when only a single window is visible (in +#: pts). Negative values will cause the value of window_padding_width +#: to be used instead. A single value sets all four sides. Two values +#: set the vertical and horizontal sides. Three values set top, +#: horizontal and bottom. Four values set top, right, bottom and left. + +# placement_strategy center + +#: When the window size is not an exact multiple of the cell size, the +#: cell area of the terminal window will have some extra padding on +#: the sides. You can control how that padding is distributed with +#: this option. Using a value of center means the cell area will be +#: placed centrally. A value of top-left means the padding will be +#: only at the bottom and right edges. + +# active_border_color #00ff00 + +#: The color for the border of the active window. Set this to none to +#: not draw borders around the active window. + +# inactive_border_color #cccccc + +#: The color for the border of inactive windows. + +# bell_border_color #ff5a00 + +#: The color for the border of inactive windows in which a bell has +#: occurred. + +# inactive_text_alpha 1.0 + +#: Fade the text in inactive windows by the specified amount (a number +#: between zero and one, with zero being fully faded). + +# hide_window_decorations no + +#: Hide the window decorations (title-bar and window borders) with +#: yes. On macOS, titlebar-only and titlebar-and-corners can be used +#: to only hide the titlebar and the rounded corners. Whether this +#: works and exactly what effect it has depends on the window +#: manager/operating system. Note that the effects of changing this +#: option when reloading config are undefined. When using titlebar- +#: only, it is useful to also set window_margin_width and +#: placement_strategy to prevent the rounded corners from clipping +#: text. Or use titlebar-and-corners. + +# window_logo_path none + +#: Path to a logo image. Must be in PNG format. Relative paths are +#: interpreted relative to the kitty config directory. The logo is +#: displayed in a corner of every kitty window. The position is +#: controlled by window_logo_position. Individual windows can be +#: configured to have different logos either using the launch action +#: or the remote control facility. + +# window_logo_position bottom-right + +#: Where to position the window logo in the window. The value can be +#: one of: top-left, top, top-right, left, center, right, bottom-left, +#: bottom, bottom-right. + +# window_logo_alpha 0.5 + +#: The amount the logo should be faded into the background. With zero +#: being fully faded and one being fully opaque. + +# resize_debounce_time 0.1 0.5 + +#: The time to wait before redrawing the screen during a live resize +#: of the OS window, when no new resize events have been received, +#: i.e. when resizing is either paused or finished. On platforms such +#: as macOS, where the operating system sends events corresponding to +#: the start and end of a live resize, the second number is used for +#: redraw-after-pause since kitty can distinguish between a pause and +#: end of resizing. On such systems the first number is ignored and +#: redraw is immediate after end of resize. On other systems the +#: first number is used so that kitty is "ready" quickly after the end +#: of resizing, while not also continuously redrawing, to save energy. + +# resize_in_steps no + +#: Resize the OS window in steps as large as the cells, instead of +#: with the usual pixel accuracy. Combined with initial_window_width +#: and initial_window_height in number of cells, this option can be +#: used to keep the margins as small as possible when resizing the OS +#: window. Note that this does not currently work on Wayland. + +# visual_window_select_characters 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZ + +#: The list of characters for visual window selection. For example, +#: for selecting a window to focus on with focus_visible_window. The +#: value should be a series of unique numbers or alphabets, case +#: insensitive, from the set 0-9A-Z\-=[];',./\\`. Specify your +#: preference as a string of characters. + +# confirm_os_window_close -1 + +#: Ask for confirmation when closing an OS window or a tab with at +#: least this number of kitty windows in it by window manager (e.g. +#: clicking the window close button or pressing the operating system +#: shortcut to close windows) or by the close_tab action. A value of +#: zero disables confirmation. This confirmation also applies to +#: requests to quit the entire application (all OS windows, via the +#: quit action). Negative values are converted to positive ones, +#: however, with shell_integration enabled, using negative values +#: means windows sitting at a shell prompt are not counted, only +#: windows where some command is currently running. Note that if you +#: want confirmation when closing individual windows, you can map the +#: close_window_with_confirmation action. + +#: }}} + +#: Tab bar {{{ + +# tab_bar_edge bottom + +#: The edge to show the tab bar on, top or bottom. + +# tab_bar_margin_width 0.0 + +#: The margin to the left and right of the tab bar (in pts). + +# tab_bar_margin_height 0.0 0.0 + +#: The margin above and below the tab bar (in pts). The first number +#: is the margin between the edge of the OS Window and the tab bar. +#: The second number is the margin between the tab bar and the +#: contents of the current tab. + +# tab_bar_style fade + +#: The tab bar style, can be one of: + +#: fade +#: Each tab's edges fade into the background color. (See also tab_fade) +#: slant +#: Tabs look like the tabs in a physical file. +#: separator +#: Tabs are separated by a configurable separator. (See also +#: tab_separator) +#: powerline +#: Tabs are shown as a continuous line with "fancy" separators. +#: (See also tab_powerline_style) +#: custom +#: A user-supplied Python function called draw_tab is loaded from the file +#: tab_bar.py in the kitty config directory. For examples of how to +#: write such a function, see the functions named draw_tab_with_* in +#: kitty's source code: kitty/tab_bar.py. See also +#: this discussion +#: for examples from kitty users. +#: hidden +#: The tab bar is hidden. If you use this, you might want to create +#: a mapping for the select_tab action which presents you with a list of +#: tabs and allows for easy switching to a tab. + +# tab_bar_align left + +#: The horizontal alignment of the tab bar, can be one of: left, +#: center, right. + +# tab_bar_min_tabs 2 + +#: The minimum number of tabs that must exist before the tab bar is +#: shown. + +# tab_switch_strategy previous + +#: The algorithm to use when switching to a tab when the current tab +#: is closed. The default of previous will switch to the last used +#: tab. A value of left will switch to the tab to the left of the +#: closed tab. A value of right will switch to the tab to the right of +#: the closed tab. A value of last will switch to the right-most tab. + +# tab_fade 0.25 0.5 0.75 1 + +#: Control how each tab fades into the background when using fade for +#: the tab_bar_style. Each number is an alpha (between zero and one) +#: that controls how much the corresponding cell fades into the +#: background, with zero being no fade and one being full fade. You +#: can change the number of cells used by adding/removing entries to +#: this list. + +# tab_separator " ┇" + +#: The separator between tabs in the tab bar when using separator as +#: the tab_bar_style. + +# tab_powerline_style angled + +#: The powerline separator style between tabs in the tab bar when +#: using powerline as the tab_bar_style, can be one of: angled, +#: slanted, round. + +# tab_activity_symbol none + +#: Some text or a Unicode symbol to show on the tab if a window in the +#: tab that does not have focus has some activity. If you want to use +#: leading or trailing spaces, surround the text with quotes. See +#: tab_title_template for how this is rendered. + +# tab_title_max_length 0 + +#: The maximum number of cells that can be used to render the text in +#: a tab. A value of zero means that no limit is applied. + +# tab_title_template "{fmt.fg.red}{bell_symbol}{activity_symbol}{fmt.fg.tab}{title}" + +#: A template to render the tab title. The default just renders the +#: title with optional symbols for bell and activity. If you wish to +#: include the tab-index as well, use something like: {index}:{title}. +#: Useful if you have shortcuts mapped for goto_tab N. If you prefer +#: to see the index as a superscript, use {sup.index}. All data +#: available is: + +#: title +#: The current tab title. +#: index +#: The tab index usable with goto_tab N goto_tab shortcuts. +#: layout_name +#: The current layout name. +#: num_windows +#: The number of windows in the tab. +#: num_window_groups +#: The number of window groups (a window group is a window and all of its overlay windows) in the tab. +#: tab.active_wd +#: The working directory of the currently active window in the tab +#: (expensive, requires syscall). Use active_oldest_wd to get +#: the directory of the oldest foreground process rather than the newest. +#: tab.active_exe +#: The name of the executable running in the foreground of the currently +#: active window in the tab (expensive, requires syscall). Use +#: active_oldest_exe for the oldest foreground process. +#: max_title_length +#: The maximum title length available. + +#: Note that formatting is done by Python's string formatting +#: machinery, so you can use, for instance, {layout_name[:2].upper()} +#: to show only the first two letters of the layout name, upper-cased. +#: If you want to style the text, you can use styling directives, for +#: example: +#: `{fmt.fg.red}red{fmt.fg.tab}normal{fmt.bg._00FF00}greenbg{fmt.bg.tab}`. +#: Similarly, for bold and italic: +#: `{fmt.bold}bold{fmt.nobold}normal{fmt.italic}italic{fmt.noitalic}`. +#: Note that for backward compatibility, if {bell_symbol} or +#: {activity_symbol} are not present in the template, they are +#: prepended to it. + +# active_tab_title_template none + +#: Template to use for active tabs. If not specified falls back to +#: tab_title_template. + +# active_tab_foreground #000 +# active_tab_background #eee +# active_tab_font_style bold-italic +# inactive_tab_foreground #444 +# inactive_tab_background #999 +# inactive_tab_font_style normal + +#: Tab bar colors and styles. + +# tab_bar_background none + +#: Background color for the tab bar. Defaults to using the terminal +#: background color. + +# tab_bar_margin_color none + +#: Color for the tab bar margin area. Defaults to using the terminal +#: background color for margins above and below the tab bar. For side +#: margins the default color is chosen to match the background color +#: of the neighboring tab. + +#: }}} + +#: Color scheme {{{ + +# foreground #dddddd +# background #000000 + +#: The foreground and background colors. + +# background_opacity 1.0 + +#: The opacity of the background. A number between zero and one, where +#: one is opaque and zero is fully transparent. This will only work if +#: supported by the OS (for instance, when using a compositor under +#: X11). Note that it only sets the background color's opacity in +#: cells that have the same background color as the default terminal +#: background, so that things like the status bar in vim, powerline +#: prompts, etc. still look good. But it means that if you use a color +#: theme with a background color in your editor, it will not be +#: rendered as transparent. Instead you should change the default +#: background color in your kitty config and not use a background +#: color in the editor color scheme. Or use the escape codes to set +#: the terminals default colors in a shell script to launch your +#: editor. Be aware that using a value less than 1.0 is a (possibly +#: significant) performance hit. When using a low value for this +#: setting, it is desirable that you set the background color to a +#: color the matches the general color of the desktop background, for +#: best text rendering. If you want to dynamically change +#: transparency of windows, set dynamic_background_opacity to yes +#: (this is off by default as it has a performance cost). Changing +#: this option when reloading the config will only work if +#: dynamic_background_opacity was enabled in the original config. + +# background_blur 0 + +#: Set to a positive value to enable background blur (blurring of the +#: visuals behind a transparent window) on platforms that support it. +#: Only takes effect when background_opacity is less than one. On +#: macOS, this will also control the blur radius (amount of blurring). +#: Setting it to too high a value will cause severe performance issues +#: and/or rendering artifacts. Usually, values up to 64 work well. +#: Note that this might cause performance issues, depending on how the +#: platform implements it, so use with care. Currently supported on +#: macOS and KDE under X11. + +# background_image none + +#: Path to a background image. Must be in PNG format. + +# background_image_layout tiled + +#: Whether to tile, scale or clamp the background image. The value can +#: be one of tiled, mirror-tiled, scaled, clamped, centered or +#: cscaled. The scaled and cscaled values scale the image to the +#: window size, with cscaled preserving the image aspect ratio. + +# background_image_linear no + +#: When background image is scaled, whether linear interpolation +#: should be used. + +# dynamic_background_opacity no + +#: Allow changing of the background_opacity dynamically, using either +#: keyboard shortcuts (increase_background_opacity and +#: decrease_background_opacity) or the remote control facility. +#: Changing this option by reloading the config is not supported. + +# background_tint 0.0 + +#: How much to tint the background image by the background color. This +#: option makes it easier to read the text. Tinting is done using the +#: current background color for each window. This option applies only +#: if background_opacity is set and transparent windows are supported +#: or background_image is set. + +# background_tint_gaps 1.0 + +#: How much to tint the background image at the window gaps by the +#: background color, after applying background_tint. Since this is +#: multiplicative with background_tint, it can be used to lighten the +#: tint over the window gaps for a *separated* look. + +# dim_opacity 0.4 + +#: How much to dim text that has the DIM/FAINT attribute set. One +#: means no dimming and zero means fully dimmed (i.e. invisible). + +# selection_foreground #000000 +# selection_background #fffacd + +#: The foreground and background colors for text selected with the +#: mouse. Setting both of these to none will cause a "reverse video" +#: effect for selections, where the selection will be the cell text +#: color and the text will become the cell background color. Setting +#: only selection_foreground to none will cause the foreground color +#: to be used unchanged. Note that these colors can be overridden by +#: the program running in the terminal. + +#: The color table {{{ + +#: The 256 terminal colors. There are 8 basic colors, each color has a +#: dull and bright version, for the first 16 colors. You can set the +#: remaining 240 colors as color16 to color255. + +# color0 #000000 +# color8 #767676 + +#: black + +# color1 #cc0403 +# color9 #f2201f + +#: red + +# color2 #19cb00 +# color10 #23fd00 + +#: green + +# color3 #cecb00 +# color11 #fffd00 + +#: yellow + +# color4 #0d73cc +# color12 #1a8fff + +#: blue + +# color5 #cb1ed1 +# color13 #fd28ff + +#: magenta + +# color6 #0dcdcd +# color14 #14ffff + +#: cyan + +# color7 #dddddd +# color15 #ffffff + +#: white + +# mark1_foreground black + +#: Color for marks of type 1 + +# mark1_background #98d3cb + +#: Color for marks of type 1 (light steel blue) + +# mark2_foreground black + +#: Color for marks of type 2 + +# mark2_background #f2dcd3 + +#: Color for marks of type 1 (beige) + +# mark3_foreground black + +#: Color for marks of type 3 + +# mark3_background #f274bc + +#: Color for marks of type 3 (violet) + +#: }}} + +#: }}} + +#: Advanced {{{ + +shell fish + +#: The shell program to execute. The default value of . means to use +#: whatever shell is set as the default shell for the current user. +#: Note that on macOS if you change this, you might need to add +#: --login and --interactive to ensure that the shell starts in +#: interactive mode and reads its startup rc files. Environment +#: variables are expanded in this setting. + +# editor . + +#: The terminal based text editor (such as vim or nano) to use when +#: editing the kitty config file or similar tasks. + +#: The default value of . means to use the environment variables +#: VISUAL and EDITOR in that order. If these variables aren't set, +#: kitty will run your shell ($SHELL -l -i -c env) to see if your +#: shell startup rc files set VISUAL or EDITOR. If that doesn't work, +#: kitty will cycle through various known editors (vim, emacs, etc.) +#: and take the first one that exists on your system. + +# close_on_child_death no + +#: Close the window when the child process (shell) exits. With the +#: default value no, the terminal will remain open when the child +#: exits as long as there are still processes outputting to the +#: terminal (for example disowned or backgrounded processes). When +#: enabled with yes, the window will close as soon as the child +#: process exits. Note that setting it to yes means that any +#: background processes still using the terminal can fail silently +#: because their stdout/stderr/stdin no longer work. + +# remote_control_password + +#: Allow other programs to control kitty using passwords. This option +#: can be specified multiple times to add multiple passwords. If no +#: passwords are present kitty will ask the user for permission if a +#: program tries to use remote control with a password. A password can +#: also *optionally* be associated with a set of allowed remote +#: control actions. For example:: + +#: remote_control_password "my passphrase" get-colors set-colors focus-window focus-tab + +#: Only the specified actions will be allowed when using this +#: password. Glob patterns can be used too, for example:: + +#: remote_control_password "my passphrase" set-tab-* resize-* + +#: To get a list of available actions, run:: + +#: kitten @ --help + +#: A set of actions to be allowed when no password is sent can be +#: specified by using an empty password. For example:: + +#: remote_control_password "" *-colors + +#: Finally, the path to a python module can be specified that provides +#: a function is_cmd_allowed that is used to check every remote +#: control command. For example:: + +#: remote_control_password "my passphrase" my_rc_command_checker.py + +#: Relative paths are resolved from the kitty configuration directory. +#: See rc_custom_auth for details. + +# allow_remote_control no + +#: Allow other programs to control kitty. If you turn this on, other +#: programs can control all aspects of kitty, including sending text +#: to kitty windows, opening new windows, closing windows, reading the +#: content of windows, etc. Note that this even works over SSH +#: connections. The default setting of no prevents any form of remote +#: control. The meaning of the various values are: + +#: password +#: Remote control requests received over both the TTY device and the socket +#: are confirmed based on passwords, see remote_control_password. + +#: socket-only +#: Remote control requests received over a socket are accepted +#: unconditionally. Requests received over the TTY are denied. +#: See listen_on. + +#: socket +#: Remote control requests received over a socket are accepted +#: unconditionally. Requests received over the TTY are confirmed based on +#: password. + +#: no +#: Remote control is completely disabled. + +#: yes +#: Remote control requests are always accepted. + +# listen_on none + +#: Listen to the specified socket for remote control connections. Note +#: that this will apply to all kitty instances. It can be overridden +#: by the kitty --listen-on command line option. For UNIX sockets, +#: such as unix:${TEMP}/mykitty or unix:@mykitty (on Linux). +#: Environment variables are expanded and relative paths are resolved +#: with respect to the temporary directory. If {kitty_pid} is present, +#: then it is replaced by the PID of the kitty process, otherwise the +#: PID of the kitty process is appended to the value, with a hyphen. +#: For TCP sockets such as tcp:localhost:0 a random port is always +#: used even if a non-zero port number is specified. See the help for +#: kitty --listen-on for more details. Note that this will be ignored +#: unless allow_remote_control is set to either: yes, socket or +#: socket-only. Changing this option by reloading the config is not +#: supported. + +# env + +#: Specify the environment variables to be set in all child processes. +#: Using the name with an equal sign (e.g. env VAR=) will set it to +#: the empty string. Specifying only the name (e.g. env VAR) will +#: remove the variable from the child process' environment. Note that +#: environment variables are expanded recursively, for example:: + +#: env VAR1=a +#: env VAR2=${HOME}/${VAR1}/b + +#: The value of VAR2 will be /a/b. + +# watcher + +#: Path to python file which will be loaded for watchers +#: . Can be +#: specified more than once to load multiple watchers. The watchers +#: will be added to every kitty window. Relative paths are resolved +#: relative to the kitty config directory. Note that reloading the +#: config will only affect windows created after the reload. + +# exe_search_path + +#: Control where kitty finds the programs to run. The default search +#: order is: First search the system wide PATH, then ~/.local/bin and +#: ~/bin. If still not found, the PATH defined in the login shell +#: after sourcing all its startup files is tried. Finally, if present, +#: the PATH specified by the env option is tried. + +#: This option allows you to prepend, append, or remove paths from +#: this search order. It can be specified multiple times for multiple +#: paths. A simple path will be prepended to the search order. A path +#: that starts with the + sign will be append to the search order, +#: after ~/bin above. A path that starts with the - sign will be +#: removed from the entire search order. For example:: + +#: exe_search_path /some/prepended/path +#: exe_search_path +/some/appended/path +#: exe_search_path -/some/excluded/path + +# update_check_interval 24 + +#: The interval to periodically check if an update to kitty is +#: available (in hours). If an update is found, a system notification +#: is displayed informing you of the available update. The default is +#: to check every 24 hours, set to zero to disable. Update checking is +#: only done by the official binary builds. Distro packages or source +#: builds do not do update checking. Changing this option by reloading +#: the config is not supported. + +# startup_session none + +#: Path to a session file to use for all kitty instances. Can be +#: overridden by using the kitty --session =none command line option +#: for individual instances. See sessions +#: in the kitty +#: documentation for details. Note that relative paths are interpreted +#: with respect to the kitty config directory. Environment variables +#: in the path are expanded. Changing this option by reloading the +#: config is not supported. + +# clipboard_control write-clipboard write-primary read-clipboard-ask read-primary-ask + +#: Allow programs running in kitty to read and write from the +#: clipboard. You can control exactly which actions are allowed. The +#: possible actions are: write-clipboard, read-clipboard, write- +#: primary, read-primary, read-clipboard-ask, read-primary-ask. The +#: default is to allow writing to the clipboard and primary selection +#: and to ask for permission when a program tries to read from the +#: clipboard. Note that disabling the read confirmation is a security +#: risk as it means that any program, even the ones running on a +#: remote server via SSH can read your clipboard. See also +#: clipboard_max_size. + +# clipboard_max_size 512 + +#: The maximum size (in MB) of data from programs running in kitty +#: that will be stored for writing to the system clipboard. A value of +#: zero means no size limit is applied. See also clipboard_control. + +# file_transfer_confirmation_bypass + +#: The password that can be supplied to the file transfer kitten +#: to skip the +#: transfer confirmation prompt. This should only be used when +#: initiating transfers from trusted computers, over trusted networks +#: or encrypted transports, as it allows any programs running on the +#: remote machine to read/write to the local filesystem, without +#: permission. + +# allow_hyperlinks yes + +#: Process hyperlink escape sequences (OSC 8). If disabled OSC 8 +#: escape sequences are ignored. Otherwise they become clickable +#: links, that you can click with the mouse or by using the hints +#: kitten . The +#: special value of ask means that kitty will ask before opening the +#: link when clicked. + +# shell_integration enabled + +#: Enable shell integration on supported shells. This enables features +#: such as jumping to previous prompts, browsing the output of the +#: previous command in a pager, etc. on supported shells. Set to +#: disabled to turn off shell integration, completely. It is also +#: possible to disable individual features, set to a space separated +#: list of these values: no-rc, no-cursor, no-title, no-cwd, no- +#: prompt-mark, no-complete, no-sudo. See Shell integration +#: for details. + +# allow_cloning ask + +#: Control whether programs running in the terminal can request new +#: windows to be created. The canonical example is clone-in-kitty +#: . +#: By default, kitty will ask for permission for each clone request. +#: Allowing cloning unconditionally gives programs running in the +#: terminal (including over SSH) permission to execute arbitrary code, +#: as the user who is running the terminal, on the computer that the +#: terminal is running on. + +# clone_source_strategies venv,conda,env_var,path + +#: Control what shell code is sourced when running clone-in-kitty in +#: the newly cloned window. The supported strategies are: + +#: venv +#: Source the file $VIRTUAL_ENV/bin/activate. This is used by the +#: Python stdlib venv module and allows cloning venvs automatically. +#: conda +#: Run conda activate $CONDA_DEFAULT_ENV. This supports the virtual +#: environments created by conda. +#: env_var +#: Execute the contents of the environment variable +#: KITTY_CLONE_SOURCE_CODE with eval. +#: path +#: Source the file pointed to by the environment variable +#: KITTY_CLONE_SOURCE_PATH. + +#: This option must be a comma separated list of the above values. +#: Only the first valid match, in the order specified, is sourced. + +# term xterm-kitty + +#: The value of the TERM environment variable to set. Changing this +#: can break many terminal programs, only change it if you know what +#: you are doing, not because you read some advice on "Stack Overflow" +#: to change it. The TERM variable is used by various programs to get +#: information about the capabilities and behavior of the terminal. If +#: you change it, depending on what programs you run, and how +#: different the terminal you are changing it to is, various things +#: from key-presses, to colors, to various advanced features may not +#: work. Changing this option by reloading the config will only affect +#: newly created windows. + +# forward_stdio no + +#: Forward STDOUT and STDERR of the kitty process to child processes +#: as file descriptors 3 and 4. This is useful for debugging as it +#: allows child processes to print to kitty's STDOUT directly. For +#: example, echo hello world >&3 in a shell will print to the parent +#: kitty's STDOUT. When enabled, this also sets the +#: KITTY_STDIO_FORWARDED=3 environment variable so child processes +#: know about the forwarding. + +# menu_map + +#: Specify entries for various menus in kitty. Currently only the +#: global menubar on macOS is supported. For example:: + +#: menu_map global "Actions::Launch something special" launch --hold --type=os-window sh -c "echo hello world" + +#: This will create a menu entry named "Launch something special" in +#: an "Actions" menu in the macOS global menubar. Sub-menus can be +#: created by adding more levels separated by ::. + +#: }}} + +#: OS specific tweaks {{{ + +# wayland_titlebar_color system + +#: The color of the kitty window's titlebar on Wayland systems with +#: client side window decorations such as GNOME. A value of system +#: means to use the default system color, a value of background means +#: to use the background color of the currently active window and +#: finally you can use an arbitrary color, such as #12af59 or red. + +# macos_titlebar_color system + +#: The color of the kitty window's titlebar on macOS. A value of +#: system means to use the default system color, light or dark can +#: also be used to set it explicitly. A value of background means to +#: use the background color of the currently active window and finally +#: you can use an arbitrary color, such as #12af59 or red. WARNING: +#: This option works by using a hack when arbitrary color (or +#: background) is configured, as there is no proper Cocoa API for it. +#: It sets the background color of the entire window and makes the +#: titlebar transparent. As such it is incompatible with +#: background_opacity. If you want to use both, you are probably +#: better off just hiding the titlebar with hide_window_decorations. + +# macos_option_as_alt no + +#: Use the Option key as an Alt key on macOS. With this set to no, +#: kitty will use the macOS native Option+Key to enter Unicode +#: character behavior. This will break any Alt+Key keyboard shortcuts +#: in your terminal programs, but you can use the macOS Unicode input +#: technique. You can use the values: left, right or both to use only +#: the left, right or both Option keys as Alt, instead. Note that +#: kitty itself always treats Option the same as Alt. This means you +#: cannot use this option to configure different kitty shortcuts for +#: Option+Key vs. Alt+Key. Also, any kitty shortcuts using +#: Option/Alt+Key will take priority, so that any such key presses +#: will not be passed to terminal programs running inside kitty. +#: Changing this option by reloading the config is not supported. + +# macos_hide_from_tasks no + +#: Hide the kitty window from running tasks on macOS (⌘+Tab and the +#: Dock). Changing this option by reloading the config is not +#: supported. + +# macos_quit_when_last_window_closed no + +#: Have kitty quit when all the top-level windows are closed on macOS. +#: By default, kitty will stay running, even with no open windows, as +#: is the expected behavior on macOS. + +# macos_window_resizable yes + +#: Disable this if you want kitty top-level OS windows to not be +#: resizable on macOS. + +# macos_thicken_font 0 + +#: Draw an extra border around the font with the given width, to +#: increase legibility at small font sizes on macOS. For example, a +#: value of 0.75 will result in rendering that looks similar to sub- +#: pixel antialiasing at common font sizes. Note that in modern kitty, +#: this option is obsolete (although still supported). Consider using +#: text_composition_strategy instead. + +# macos_traditional_fullscreen no + +#: Use the macOS traditional full-screen transition, that is faster, +#: but less pretty. + +# macos_show_window_title_in all + +#: Control where the window title is displayed on macOS. A value of +#: window will show the title of the currently active window at the +#: top of the macOS window. A value of menubar will show the title of +#: the currently active window in the macOS global menu bar, making +#: use of otherwise wasted space. A value of all will show the title +#: in both places, and none hides the title. See +#: macos_menubar_title_max_length for how to control the length of the +#: title in the menu bar. + +# macos_menubar_title_max_length 0 + +#: The maximum number of characters from the window title to show in +#: the macOS global menu bar. Values less than one means that there is +#: no maximum limit. + +# macos_custom_beam_cursor no + +#: Use a custom mouse cursor for macOS that is easier to see on both +#: light and dark backgrounds. Nowadays, the default macOS cursor +#: already comes with a white border. WARNING: this might make your +#: mouse cursor invisible on dual GPU machines. Changing this option +#: by reloading the config is not supported. + +# macos_colorspace srgb + +#: The colorspace in which to interpret terminal colors. The default +#: of srgb will cause colors to match those seen in web browsers. The +#: value of default will use whatever the native colorspace of the +#: display is. The value of displayp3 will use Apple's special +#: snowflake display P3 color space, which will result in over +#: saturated (brighter) colors with some color shift. Reloading +#: configuration will change this value only for newly created OS +#: windows. + +# linux_display_server auto + +#: Choose between Wayland and X11 backends. By default, an appropriate +#: backend based on the system state is chosen automatically. Set it +#: to x11 or wayland to force the choice. Changing this option by +#: reloading the config is not supported. + +#: }}} + +#: Keyboard shortcuts {{{ + +#: Keys are identified simply by their lowercase Unicode characters. +#: For example: a for the A key, [ for the left square bracket key, +#: etc. For functional keys, such as Enter or Escape, the names are +#: present at Functional key definitions +#: . +#: For modifier keys, the names are ctrl (control, ⌃), shift (⇧), alt +#: (opt, option, ⌥), super (cmd, command, ⌘). See also: GLFW mods +#: + +#: On Linux you can also use XKB key names to bind keys that are not +#: supported by GLFW. See XKB keys +#: for a list of key names. The name to use is the part +#: after the XKB_KEY_ prefix. Note that you can only use an XKB key +#: name for keys that are not known as GLFW keys. + +#: Finally, you can use raw system key codes to map keys, again only +#: for keys that are not known as GLFW keys. To see the system key +#: code for a key, start kitty with the kitty --debug-input option, +#: kitty will output some debug text for every key event. In that text +#: look for native_code, the value of that becomes the key name in the +#: shortcut. For example: + +#: .. code-block:: none + +#: on_key_input: glfw key: 0x61 native_code: 0x61 action: PRESS mods: none text: 'a' + +#: Here, the key name for the A key is 0x61 and you can use it with:: + +#: map ctrl+0x61 something + +#: to map Ctrl+A to something. + +#: You can use the special action no_op to unmap a keyboard shortcut +#: that is assigned in the default configuration:: + +#: map kitty_mod+space no_op + +#: If you would like kitty to completely ignore a key event, not even +#: sending it to the program running in the terminal, map it to +#: discard_event:: + +#: map kitty_mod+f1 discard_event + +#: You can combine multiple actions to be triggered by a single +#: shortcut with combine action, using the syntax below:: + +#: map key combine action1 action2 action3 ... + +#: For example:: + +#: map kitty_mod+e combine : new_window : next_layout + +#: This will create a new window and switch to the next available +#: layout. + +#: You can use multi-key shortcuts with the syntax shown below:: + +#: map key1>key2>key3 action + +#: For example:: + +#: map ctrl+f>2 set_font_size 20 + +#: The full list of actions that can be mapped to key presses is +#: available here . + +# kitty_mod ctrl+shift + +#: Special modifier key alias for default shortcuts. You can change +#: the value of this option to alter all default shortcuts that use +#: kitty_mod. + +# clear_all_shortcuts no + +#: Remove all shortcut definitions up to this point. Useful, for +#: instance, to remove the default shortcuts. + +# action_alias + +#: E.g. action_alias launch_tab launch --type=tab --cwd=current + +#: Define action aliases to avoid repeating the same options in +#: multiple mappings. Aliases can be defined for any action and will +#: be expanded recursively. For example, the above alias allows you to +#: create mappings to launch a new tab in the current working +#: directory without duplication:: + +#: map f1 launch_tab vim +#: map f2 launch_tab emacs + +#: Similarly, to alias kitten invocation:: + +#: action_alias hints kitten hints --hints-offset=0 + +# kitten_alias + +#: E.g. kitten_alias hints hints --hints-offset=0 + +#: Like action_alias above, but specifically for kittens. Generally, +#: prefer to use action_alias. This option is a legacy version, +#: present for backwards compatibility. It causes all invocations of +#: the aliased kitten to be substituted. So the example above will +#: cause all invocations of the hints kitten to have the --hints- +#: offset=0 option applied. + +#: Clipboard {{{ + +#: Copy to clipboard + +# map kitty_mod+c copy_to_clipboard +# map cmd+c copy_to_clipboard + +#:: There is also a copy_or_interrupt action that can be optionally +#:: mapped to Ctrl+C. It will copy only if there is a selection and +#:: send an interrupt otherwise. Similarly, +#:: copy_and_clear_or_interrupt will copy and clear the selection or +#:: send an interrupt if there is no selection. + +#: Paste from clipboard + +# map kitty_mod+v paste_from_clipboard +# map cmd+v paste_from_clipboard + +#: Paste from selection + +# map kitty_mod+s paste_from_selection +# map shift+insert paste_from_selection + +#: Pass selection to program + +# map kitty_mod+o pass_selection_to_program + +#:: You can also pass the contents of the current selection to any +#:: program with pass_selection_to_program. By default, the system's +#:: open program is used, but you can specify your own, the selection +#:: will be passed as a command line argument to the program. For +#:: example:: + +#:: map kitty_mod+o pass_selection_to_program firefox + +#:: You can pass the current selection to a terminal program running +#:: in a new kitty window, by using the @selection placeholder:: + +#:: map kitty_mod+y new_window less @selection + +#: }}} + +#: Scrolling {{{ + +#: Scroll line up + +# map kitty_mod+up scroll_line_up +# map kitty_mod+k scroll_line_up +# map opt+cmd+page_up scroll_line_up +# map cmd+up scroll_line_up + +#: Scroll line down + +# map kitty_mod+down scroll_line_down +# map kitty_mod+j scroll_line_down +# map opt+cmd+page_down scroll_line_down +# map cmd+down scroll_line_down + +#: Scroll page up + +# map kitty_mod+page_up scroll_page_up +# map cmd+page_up scroll_page_up + +#: Scroll page down + +# map kitty_mod+page_down scroll_page_down +# map cmd+page_down scroll_page_down + +#: Scroll to top + +# map kitty_mod+home scroll_home +# map cmd+home scroll_home + +#: Scroll to bottom + +# map kitty_mod+end scroll_end +# map cmd+end scroll_end + +#: Scroll to previous shell prompt + +# map kitty_mod+z scroll_to_prompt -1 + +#:: Use a parameter of 0 for scroll_to_prompt to scroll to the last +#:: jumped to or the last clicked position. Requires shell +#:: integration +#:: to work. + +#: Scroll to next shell prompt + +# map kitty_mod+x scroll_to_prompt 1 + +#: Browse scrollback buffer in pager + +# map kitty_mod+h show_scrollback + +#:: You can pipe the contents of the current screen and history +#:: buffer as STDIN to an arbitrary program using launch --stdin- +#:: source. For example, the following opens the scrollback buffer in +#:: less in an overlay window:: + +#:: map f1 launch --stdin-source=@screen_scrollback --stdin-add-formatting --type=overlay less +G -R + +#:: For more details on piping screen and buffer contents to external +#:: programs, see launch . + +#: Browse output of the last shell command in pager + +# map kitty_mod+g show_last_command_output + +#:: You can also define additional shortcuts to get the command +#:: output. For example, to get the first command output on screen:: + +#:: map f1 show_first_command_output_on_screen + +#:: To get the command output that was last accessed by a keyboard +#:: action or mouse action:: + +#:: map f1 show_last_visited_command_output + +#:: You can pipe the output of the last command run in the shell +#:: using the launch action. For example, the following opens the +#:: output in less in an overlay window:: + +#:: map f1 launch --stdin-source=@last_cmd_output --stdin-add-formatting --type=overlay less +G -R + +#:: To get the output of the first command on the screen, use +#:: @first_cmd_output_on_screen. To get the output of the last jumped +#:: to command, use @last_visited_cmd_output. + +#:: Requires shell integration +#:: to work. + +#: }}} + +#: Window management {{{ + +#: New window + +# map kitty_mod+enter new_window +# map cmd+enter new_window + +#:: You can open a new kitty window running an arbitrary program, for +#:: example:: + +#:: map kitty_mod+y launch mutt + +#:: You can open a new window with the current working directory set +#:: to the working directory of the current window using:: + +#:: map ctrl+alt+enter launch --cwd=current + +#:: You can open a new window that is allowed to control kitty via +#:: the kitty remote control facility with launch --allow-remote- +#:: control. Any programs running in that window will be allowed to +#:: control kitty. For example:: + +#:: map ctrl+enter launch --allow-remote-control some_program + +#:: You can open a new window next to the currently active window or +#:: as the first window, with:: + +#:: map ctrl+n launch --location=neighbor +#:: map ctrl+f launch --location=first + +#:: For more details, see launch +#:: . + +#: New OS window + +# map kitty_mod+n new_os_window +# map cmd+n new_os_window + +#:: Works like new_window above, except that it opens a top-level OS +#:: window. In particular you can use new_os_window_with_cwd to open +#:: a window with the current working directory. + +#: Close window + +# map kitty_mod+w close_window +# map shift+cmd+d close_window + +#: Next window + +# map kitty_mod+] next_window + +#: Previous window + +# map kitty_mod+[ previous_window + +#: Move window forward + +# map kitty_mod+f move_window_forward + +#: Move window backward + +# map kitty_mod+b move_window_backward + +#: Move window to top + +# map kitty_mod+` move_window_to_top + +#: Start resizing window + +# map kitty_mod+r start_resizing_window +# map cmd+r start_resizing_window + +#: First window + +# map kitty_mod+1 first_window +# map cmd+1 first_window + +#: Second window + +# map kitty_mod+2 second_window +# map cmd+2 second_window + +#: Third window + +# map kitty_mod+3 third_window +# map cmd+3 third_window + +#: Fourth window + +# map kitty_mod+4 fourth_window +# map cmd+4 fourth_window + +#: Fifth window + +# map kitty_mod+5 fifth_window +# map cmd+5 fifth_window + +#: Sixth window + +# map kitty_mod+6 sixth_window +# map cmd+6 sixth_window + +#: Seventh window + +# map kitty_mod+7 seventh_window +# map cmd+7 seventh_window + +#: Eighth window + +# map kitty_mod+8 eighth_window +# map cmd+8 eighth_window + +#: Ninth window + +# map kitty_mod+9 ninth_window +# map cmd+9 ninth_window + +#: Tenth window + +# map kitty_mod+0 tenth_window + +#: Visually select and focus window + +# map kitty_mod+f7 focus_visible_window + +#:: Display overlay numbers and alphabets on the window, and switch +#:: the focus to the window when you press the key. When there are +#:: only two windows, the focus will be switched directly without +#:: displaying the overlay. You can change the overlay characters and +#:: their order with option visual_window_select_characters. + +#: Visually swap window with another + +# map kitty_mod+f8 swap_with_window + +#:: Works like focus_visible_window above, but swaps the window. + +#: }}} + +#: Tab management {{{ + +#: Next tab + +# map kitty_mod+right next_tab +# map shift+cmd+] next_tab +# map ctrl+tab next_tab + +#: Previous tab + +# map kitty_mod+left previous_tab +# map shift+cmd+[ previous_tab +# map ctrl+shift+tab previous_tab + +#: New tab + +# map kitty_mod+t new_tab +# map cmd+t new_tab + +#: Close tab + +# map kitty_mod+q close_tab +# map cmd+w close_tab + +#: Close OS window + +# map shift+cmd+w close_os_window + +#: Move tab forward + +# map kitty_mod+. move_tab_forward + +#: Move tab backward + +# map kitty_mod+, move_tab_backward + +#: Set tab title + +# map kitty_mod+alt+t set_tab_title +# map shift+cmd+i set_tab_title + + +#: You can also create shortcuts to go to specific tabs, with 1 being +#: the first tab, 2 the second tab and -1 being the previously active +#: tab, and any number larger than the last tab being the last tab:: + +#: map ctrl+alt+1 goto_tab 1 +#: map ctrl+alt+2 goto_tab 2 + +#: Just as with new_window above, you can also pass the name of +#: arbitrary commands to run when using new_tab and new_tab_with_cwd. +#: Finally, if you want the new tab to open next to the current tab +#: rather than at the end of the tabs list, use:: + +#: map ctrl+t new_tab !neighbor [optional cmd to run] +#: }}} + +#: Layout management {{{ + +#: Next layout + +# map kitty_mod+l next_layout + + +#: You can also create shortcuts to switch to specific layouts:: + +#: map ctrl+alt+t goto_layout tall +#: map ctrl+alt+s goto_layout stack + +#: Similarly, to switch back to the previous layout:: + +#: map ctrl+alt+p last_used_layout + +#: There is also a toggle_layout action that switches to the named +#: layout or back to the previous layout if in the named layout. +#: Useful to temporarily "zoom" the active window by switching to the +#: stack layout:: + +#: map ctrl+alt+z toggle_layout stack +#: }}} + +#: Font sizes {{{ + +#: You can change the font size for all top-level kitty OS windows at +#: a time or only the current one. + +#: Increase font size + +# map kitty_mod+equal change_font_size all +2.0 +# map kitty_mod+plus change_font_size all +2.0 +# map kitty_mod+kp_add change_font_size all +2.0 +# map cmd+plus change_font_size all +2.0 +# map cmd+equal change_font_size all +2.0 +# map shift+cmd+equal change_font_size all +2.0 + +#: Decrease font size + +# map kitty_mod+minus change_font_size all -2.0 +# map kitty_mod+kp_subtract change_font_size all -2.0 +# map cmd+minus change_font_size all -2.0 +# map shift+cmd+minus change_font_size all -2.0 + +#: Reset font size + +# map kitty_mod+backspace change_font_size all 0 +# map cmd+0 change_font_size all 0 + + +#: To setup shortcuts for specific font sizes:: + +#: map kitty_mod+f6 change_font_size all 10.0 + +#: To setup shortcuts to change only the current OS window's font +#: size:: + +#: map kitty_mod+f6 change_font_size current 10.0 +#: }}} + +#: Select and act on visible text {{{ + +#: Use the hints kitten to select text and either pass it to an +#: external program or insert it into the terminal or copy it to the +#: clipboard. + +#: Open URL + +# map kitty_mod+e open_url_with_hints + +#:: Open a currently visible URL using the keyboard. The program used +#:: to open the URL is specified in open_url_with. + +#: Insert selected path + +# map kitty_mod+p>f kitten hints --type path --program - + +#:: Select a path/filename and insert it into the terminal. Useful, +#:: for instance to run git commands on a filename output from a +#:: previous git command. + +#: Open selected path + +# map kitty_mod+p>shift+f kitten hints --type path + +#:: Select a path/filename and open it with the default open program. + +#: Insert selected line + +# map kitty_mod+p>l kitten hints --type line --program - + +#:: Select a line of text and insert it into the terminal. Useful for +#:: the output of things like: `ls -1`. + +#: Insert selected word + +# map kitty_mod+p>w kitten hints --type word --program - + +#:: Select words and insert into terminal. + +#: Insert selected hash + +# map kitty_mod+p>h kitten hints --type hash --program - + +#:: Select something that looks like a hash and insert it into the +#:: terminal. Useful with git, which uses SHA1 hashes to identify +#:: commits. + +#: Open the selected file at the selected line + +# map kitty_mod+p>n kitten hints --type linenum + +#:: Select something that looks like filename:linenum and open it in +#:: vim at the specified line number. + +#: Open the selected hyperlink + +# map kitty_mod+p>y kitten hints --type hyperlink + +#:: Select a hyperlink (i.e. a URL that has been marked as such by +#:: the terminal program, for example, by `ls --hyperlink=auto`). + + +#: The hints kitten has many more modes of operation that you can map +#: to different shortcuts. For a full description see hints kitten +#: . +#: }}} + +#: Miscellaneous {{{ + +#: Show documentation + +# map kitty_mod+f1 show_kitty_doc overview + +#: Toggle fullscreen + +# map kitty_mod+f11 toggle_fullscreen +# map ctrl+cmd+f toggle_fullscreen + +#: Toggle maximized + +# map kitty_mod+f10 toggle_maximized + +#: Toggle macOS secure keyboard entry + +# map opt+cmd+s toggle_macos_secure_keyboard_entry + +#: Unicode input + +# map kitty_mod+u kitten unicode_input +# map ctrl+cmd+space kitten unicode_input + +#: Edit config file + +# map kitty_mod+f2 edit_config_file +# map cmd+, edit_config_file + +#: Open the kitty command shell + +# map kitty_mod+escape kitty_shell window + +#:: Open the kitty shell in a new window / tab / overlay / os_window +#:: to control kitty using commands. + +#: Increase background opacity + +# map kitty_mod+a>m set_background_opacity +0.1 + +#: Decrease background opacity + +# map kitty_mod+a>l set_background_opacity -0.1 + +#: Make background fully opaque + +# map kitty_mod+a>1 set_background_opacity 1 + +#: Reset background opacity + +# map kitty_mod+a>d set_background_opacity default + +#: Reset the terminal + +# map kitty_mod+delete clear_terminal reset active +# map opt+cmd+r clear_terminal reset active + +#:: You can create shortcuts to clear/reset the terminal. For +#:: example:: + +#:: # Reset the terminal +#:: map f1 clear_terminal reset active +#:: # Clear the terminal screen by erasing all contents +#:: map f1 clear_terminal clear active +#:: # Clear the terminal scrollback by erasing it +#:: map f1 clear_terminal scrollback active +#:: # Scroll the contents of the screen into the scrollback +#:: map f1 clear_terminal scroll active +#:: # Clear everything up to the line with the cursor +#:: map f1 clear_terminal to_cursor active + +#:: If you want to operate on all kitty windows instead of just the +#:: current one, use all instead of active. + +#:: Some useful functions that can be defined in the shell rc files +#:: to perform various kinds of clearing of the current window: + +#:: .. code-block:: sh + +#:: clear-only-screen() { +#:: printf "\e[H\e[2J" +#:: } + +#:: clear-screen-and-scrollback() { +#:: printf "\e[H\e[3J" +#:: } + +#:: clear-screen-saving-contents-in-scrollback() { +#:: printf "\e[H\e[22J" +#:: } + +#:: For instance, using these escape codes, it is possible to remap +#:: Ctrl+L to both scroll the current screen contents into the +#:: scrollback buffer and clear the screen, instead of just clearing +#:: the screen. For ZSH, in ~/.zshrc, add: + +#:: .. code-block:: zsh + +#:: ctrl_l() { +#:: builtin print -rn -- $'\r\e[0J\e[H\e[22J' >"$TTY" +#:: builtin zle .reset-prompt +#:: builtin zle -R +#:: } +#:: zle -N ctrl_l +#:: bindkey '^l' ctrl_l + +#: Clear up to cursor line + +# map cmd+k clear_terminal to_cursor active + +#: Reload kitty.conf + +# map kitty_mod+f5 load_config_file +# map ctrl+cmd+, load_config_file + +#:: Reload kitty.conf, applying any changes since the last time it +#:: was loaded. Note that a handful of options cannot be dynamically +#:: changed and require a full restart of kitty. Particularly, when +#:: changing shortcuts for actions located on the macOS global menu +#:: bar, a full restart is needed. You can also map a keybinding to +#:: load a different config file, for example:: + +#:: map f5 load_config /path/to/alternative/kitty.conf + +#:: Note that all options from the original kitty.conf are discarded, +#:: in other words the new configuration *replace* the old ones. + +#: Debug kitty configuration + +# map kitty_mod+f6 debug_config +# map opt+cmd+, debug_config + +#:: Show details about exactly what configuration kitty is running +#:: with and its host environment. Useful for debugging issues. + +#: Send arbitrary text on key presses + +#:: E.g. map ctrl+shift+alt+h send_text all Hello World + +#:: You can tell kitty to send arbitrary (UTF-8) encoded text to the +#:: client program when pressing specified shortcut keys. For +#:: example:: + +#:: map ctrl+alt+a send_text all Special text + +#:: This will send "Special text" when you press the Ctrl+Alt+A key +#:: combination. The text to be sent decodes ANSI C escapes +#:: so you can use escapes like \e to send control +#:: codes or \u21fb to send Unicode characters (or you can just input +#:: the Unicode characters directly as UTF-8 text). You can use +#:: `kitten show_key` to get the key escape codes you want to +#:: emulate. + +#:: The first argument to send_text is the keyboard modes in which to +#:: activate the shortcut. The possible values are normal, +#:: application, kitty or a comma separated combination of them. The +#:: modes normal and application refer to the DECCKM cursor key mode +#:: for terminals, and kitty refers to the kitty extended keyboard +#:: protocol. The special value all means all of them. + +#:: Some more examples:: + +#:: # Output a word and move the cursor to the start of the line (like typing and pressing Home) +#:: map ctrl+alt+a send_text normal Word\e[H +#:: map ctrl+alt+a send_text application Word\eOH +#:: # Run a command at a shell prompt (like typing the command and pressing Enter) +#:: map ctrl+alt+a send_text normal,application some command with arguments\r + +#: Open kitty Website + +# map shift+cmd+/ open_url https://sw.kovidgoyal.net/kitty/ + +#: Hide macOS kitty application + +# map cmd+h hide_macos_app + +#: Hide macOS other applications + +# map opt+cmd+h hide_macos_other_apps + +#: Minimize macOS window + +# map cmd+m minimize_macos_window + +#: Quit kitty + +# map cmd+q quit + +#: }}} + +#: }}} + +include dracula.conf diff --git a/desktops/hyprland/etc/skel/config/neofetch/config.conf b/desktops/hyprland/etc/skel/config/neofetch/config.conf new file mode 100644 index 0000000..7991403 --- /dev/null +++ b/desktops/hyprland/etc/skel/config/neofetch/config.conf @@ -0,0 +1,126 @@ +# Source: https://github.com/Chick2D/neofetch-themes/ +# Made by https://github.com/tralph3 +# Customization Wiki https://github.com/dylanaraps/neofetch/wiki/Customizing-Info + +# Colour config is here and in .zshrc + +print_info() { + info title + info underline + + prin "$(color 12)╭──────────── $(color 10)Software$(color 12) ────────────" + info "$(color 12)│ $(color 14)OS" distro + info "$(color 12)│ $(color 14)Kernel" kernel + info "$(color 12)│ $(color 14)Packages" packages + info "$(color 12)│ $(color 14)Shell" shell + info "$(color 12)│ $(color 14)DE" de + info "$(color 12)│ $(color 14)Terminal" term + # info "$(color 12)│ $(color 14)Local IP" local_ip + prin "$(color 12)├──────────── $(color 10)Hardware$(color 12) ────────────" + info "$(color 12)│ $(color 14)Host" model + info "$(color 12)│ $(color 14)CPU" cpu + info "$(color 12)│ $(color 14)GPU" gpu + info "$(color 12)│ $(color 14)Memory" memory + info "$(color 12)│ $(color 14)Disk" disk + prin "$(color 12)├───────────── $(color 10)Uptime$(color 12) ─────────────" + info "$(color 12)│" uptime + prin "$(color 12)╰──────────────────────────────────" + + # info cols + + # Defaults + + # info "OS" distro + # info "Host" model + # info "Kernel" kernel + # info "Uptime" uptime + # info "Packages" packages + # info "Shell" shell + # info "Resolution" resolution + # info "DE" de + # info "WM" wm + # info "WM Theme" wm_theme + # info "Theme" theme + # info "Icons" icons + # info "Terminal" term + # info "Terminal Font" term_font + # info "CPU" cpu + # info "GPU" gpu + # info "Memory" memory + + # info "GPU Driver" gpu_driver # Linux/macOS only + # info "CPU Usage" cpu_usage + # info "Disk" disk + # info "Battery" battery + # info "Font" font + # info "Song" song + # [[ "$player" ]] && prin "Music Player" "$player" + # info "Local IP" local_ip + # info "Public IP" public_ip + # info "Users" users + # info "Locale" locale # This only works on glibc systems. + + # info cols + +} + +# To know what these functions mean, go to the Customization Wiki on top + +title_fqdn="off" +kernel_shorthand="on" +distro_shorthand="on" +os_arch="off" +uptime_shorthand="off" +memory_percent="off" +memory_unit="mib" +package_managers="on" +shell_path="off" +shell_version="on" +cpu_brand="on" +cpu_speed="on" +cpu_cores="logical" +cpu_temp="off" +gpu_type="all" +refresh_rate="on" +gtk_shorthand="on" +gtk2="on" +gtk3="on" +public_ip_host="http://ident.me" +public_ip_timeout=2 +de_version="on" +disk_subtitle="dir" +disk_percent="on" +music_player="auto" +song_format="%artist% - %title%" +mpc_args=() +colors=(distro) +underline_enabled="on" +underline_char="¨" +separator="›" +color_blocks="on" +block_width=3 +block_height=1 +col_offset="auto" +bar_char_elapsed="-" +bar_char_total="=" +bar_border="on" +bar_length=15 +bar_color_elapsed="distro" +bar_color_total="distro" +cpu_display="off" +memory_display="off" +battery_display="off" +disk_display="off" +image_source="auto" +ascii_distro="auto" +ascii_bold="on" +image_loop="off" +thumbnail_dir="${XDG_CACHE_HOME:-${HOME}/.cache}/thumbnails/neofetch" +crop_mode="normal" +crop_offset="center" +image_size="auto" +gap=3 +yoffset=0 +xoffset=0 +background_color= +stdout="off" diff --git a/desktops/hyprland/etc/skel/config/pipewire/pipewire-pulse.conf b/desktops/hyprland/etc/skel/config/pipewire/pipewire-pulse.conf new file mode 100644 index 0000000..07f7e9e --- /dev/null +++ b/desktops/hyprland/etc/skel/config/pipewire/pipewire-pulse.conf @@ -0,0 +1,171 @@ +# PulseAudio config file for PipeWire version "0.3.84" # +# +# Copy and edit this file in /etc/pipewire for system-wide changes +# or in ~/.config/pipewire for local changes. +# +# It is also possible to place a file with an updated section in +# /etc/pipewire/pipewire-pulse.conf.d/ for system-wide changes or in +# ~/.config/pipewire/pipewire-pulse.conf.d/ for local changes. +# + +context.properties = { + ## Configure properties in the system. + #mem.warn-mlock = false + #mem.allow-mlock = true + #mem.mlock-all = false + #log.level = 2 + + #default.clock.quantum-limit = 8192 +} + +context.spa-libs = { + audio.convert.* = audioconvert/libspa-audioconvert + support.* = support/libspa-support +} + +context.modules = [ + { name = libpipewire-module-rt + args = { + nice.level = -11 + #rt.prio = 88 + rt.prio = 65 + #rt.time.soft = -1 + #rt.time.hard = -1 + } + flags = [ ifexists nofail ] + } + { name = libpipewire-module-protocol-native } + { name = libpipewire-module-client-node } + { name = libpipewire-module-adapter } + { name = libpipewire-module-metadata } + + { name = libpipewire-module-protocol-pulse + args = { + # contents of pulse.properties can also be placed here + # to have config per server. + } + } +] + +# Extra scripts can be started here. Setup in default.pa can be moved in +# a script or in pulse.cmd below +context.exec = [ + { path = "pactl" args = "load-module module-null-sink sink_name=merge-io" } + { path = "pactl" args = "load-module module-loopback sink=merge-io source=@DEFAULT_AUDIO_SOURCE@" } + { path = "pactl" args = "load-module module-loopback sink=merge-io source=@DEFAULT_AUDIO_SINK@" } + #{ path = "pactl" args = "load-module module-always-sink" } + #{ path = "pactl" args = "upload-sample my-sample.wav my-sample" } + #{ path = "/usr/bin/sh" args = "~/.config/pipewire/default.pw" } +] + +# Extra commands can be executed here. +# load-module : loads a module with args and flags +# args = " " +# ( flags = [ nofail ] ) +pulse.cmd = [ + { cmd = "load-module" args = "module-always-sink" flags = [ ] } + #{ cmd = "load-module" args = "module-switch-on-connect" } + #{ cmd = "load-module" args = "module-gsettings" flags = [ nofail ] } +] + +stream.properties = { + #node.latency = 1024/48000 + #node.autoconnect = true + #resample.quality = 4 + #channelmix.normalize = false + #channelmix.mix-lfe = true + #channelmix.upmix = true + #channelmix.upmix-method = psd # none, simple + #channelmix.lfe-cutoff = 150 + #channelmix.fc-cutoff = 12000 + #channelmix.rear-delay = 12.0 + #channelmix.stereo-widen = 0.0 + #channelmix.hilbert-taps = 0 + #dither.noise = 0 +} + +pulse.properties = { + # the addresses this server listens on + server.address = [ + "unix:native" + #"unix:/tmp/something" # absolute paths may be used + #"tcp:4713" # IPv4 and IPv6 on all addresses + #"tcp:[::]:9999" # IPv6 on all addresses + #"tcp:127.0.0.1:8888" # IPv4 on a single address + # + #{ address = "tcp:4713" # address + # max-clients = 64 # maximum number of clients + # listen-backlog = 32 # backlog in the server listen queue + # client.access = "restricted" # permissions for clients + #} + ] + #server.dbus-name = "org.pulseaudio.Server" + #pulse.min.req = 128/48000 # 2.7ms + #pulse.default.req = 960/48000 # 20 milliseconds + #pulse.min.frag = 128/48000 # 2.7ms + #pulse.default.frag = 96000/48000 # 2 seconds + #pulse.default.tlength = 96000/48000 # 2 seconds + #pulse.min.quantum = 128/48000 # 2.7ms + #pulse.idle.timeout = 0 # don't pause after underruns + #pulse.default.format = F32 + #pulse.default.position = [ FL FR ] + # These overrides are only applied when running in a vm. + vm.overrides = { + pulse.min.quantum = 1024/48000 # 22ms + } +} + +# client/stream specific properties +pulse.rules = [ + { + matches = [ + { + # all keys must match the value. ! negates. ~ starts regex. + #client.name = "Firefox" + #application.process.binary = "teams" + #application.name = "~speech-dispatcher.*" + } + ] + actions = { + update-props = { + #node.latency = 512/48000 + } + # Possible quirks:" + # force-s16-info forces sink and source info as S16 format + # remove-capture-dont-move removes the capture DONT_MOVE flag + # block-source-volume blocks updates to source volume + # block-sink-volume blocks updates to sink volume + #quirks = [ ] + } + } + { + # skype does not want to use devices that don't have an S16 sample format. + matches = [ + { application.process.binary = "teams" } + { application.process.binary = "teams-insiders" } + { application.process.binary = "skypeforlinux" } + ] + actions = { quirks = [ force-s16-info ] } + } + { + # firefox marks the capture streams as don't move and then they + # can't be moved with pavucontrol or other tools. + matches = [ { application.process.binary = "firefox" } ] + actions = { quirks = [ remove-capture-dont-move ] } + } + { + # speech dispatcher asks for too small latency and then underruns. + matches = [ { application.name = "~speech-dispatcher.*" } ] + actions = { + update-props = { + pulse.min.req = 512/48000 # 10.6ms + pulse.min.quantum = 512/48000 # 10.6ms + pulse.idle.timeout = 5 # pause after 5 seconds of underrun + } + } + } + #{ + # matches = [ { application.process.binary = "Discord" } ] + # actions = { quirks = [ block-source-volume ] } + #} +] diff --git a/desktops/hyprland/etc/skel/config/starship.toml b/desktops/hyprland/etc/skel/config/starship.toml new file mode 100644 index 0000000..0dea8ee --- /dev/null +++ b/desktops/hyprland/etc/skel/config/starship.toml @@ -0,0 +1,25 @@ +[aws] +style = "#ffb86c" + +[character] +success_symbol = "[➜](#50fa7b) " +error_symbol = "[➜](#ff5555) " + +[cmd_duration] +style = "bold #f1fa8c" + +[directory] +style = "bold #50fa7b" + +[git_branch] +style = "bold #ff79c6" + +[git_status] +style = "bold #ff5555" + +[hostname] +style = "bold #bd93f9" + +[username] +format = "[$user]($style) on " +style_user = "bold #8be9fd" \ No newline at end of file diff --git a/desktops/hyprland/etc/skel/config/swappy/config b/desktops/hyprland/etc/skel/config/swappy/config new file mode 100644 index 0000000..41f84ab --- /dev/null +++ b/desktops/hyprland/etc/skel/config/swappy/config @@ -0,0 +1,10 @@ +[Default] +save_dir=$HOME/Picture/Screenshot/ +save_filename_format=swappy-%Y%m%d-%H%M%S.png +show_panel=true +line_size=5 +text_size=20 +text_font=FiraCode +paint_mode=arrow +early_exit=true +fill_shape=false \ No newline at end of file diff --git a/desktops/hyprland/etc/skel/config/swaylock/config b/desktops/hyprland/etc/skel/config/swaylock/config new file mode 100644 index 0000000..3fec795 --- /dev/null +++ b/desktops/hyprland/etc/skel/config/swaylock/config @@ -0,0 +1,29 @@ +image=~/.config/swaylock/dracula-wallpaper.svg +color=282a36 +inside-color=1F202A +line-color=1F202A +ring-color=bd93f9 +text-color=f8f8f2 + +layout-bg-color=1F202A +layout-text-color=f8f8f2 + +inside-clear-color=6272a4 +line-clear-color=1F202A +ring-clear-color=6272a4 +text-clear-color=1F202A + +inside-ver-color=bd93f9 +line-ver-color=1F202A +ring-ver-color=bd93f9 +text-ver-color=1F202A + +inside-wrong-color=ff5555 +line-wrong-color=1F202A +ring-wrong-color=ff5555 +text-wrong-color=1F202A + +bs-hl-color=ff5555 +key-hl-color=50fa7b + +text-caps-lock-color=f8f8f2 diff --git a/desktops/hyprland/etc/skel/config/swaylock/dracula-wallpaper.svg b/desktops/hyprland/etc/skel/config/swaylock/dracula-wallpaper.svg new file mode 100644 index 0000000..91596cb --- /dev/null +++ b/desktops/hyprland/etc/skel/config/swaylock/dracula-wallpaper.svg @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/desktops/hyprland/etc/skel/config/waybar/colors.css b/desktops/hyprland/etc/skel/config/waybar/colors.css new file mode 100644 index 0000000..076f988 --- /dev/null +++ b/desktops/hyprland/etc/skel/config/waybar/colors.css @@ -0,0 +1,12 @@ +@define-color background-darker #1e1f29; +@define-color background #282a36; +@define-color selection #44475a; +@define-color foreground #f8f8f2; +@define-color comment #6272a4; +@define-color cyan #8be9fd; +@define-color green #50fa7b; +@define-color orange #ffb86c; +@define-color pink #ff79c6; +@define-color purple #bd93f9; +@define-color red #ff5555; +@define-color yellow #f1fa8c; diff --git a/desktops/hyprland/etc/skel/config/waybar/config b/desktops/hyprland/etc/skel/config/waybar/config new file mode 100644 index 0000000..5d9bd88 --- /dev/null +++ b/desktops/hyprland/etc/skel/config/waybar/config @@ -0,0 +1,107 @@ +{ + "layer": "top", + "position": "top", + "height": 30, + + "modules-left": ["tray", "cpu", "temperature","memory", "clock"], + "modules-center": ["hyprland/workspaces"], + "modules-right": ["hyprland/language", "wireplumber", "pulseaudio#mic", "battery", "network", "backlight"], + + "tray": { + "icon-size": 20, + "spacing": 10 + }, + "cpu": { + "format": "{usage}% ", + "tooltip": false, + "interval": 3 + }, + "temperature": { + "critical-threshold": 80, + "format": "{temperatureC}°C {icon}", + "format-icons": ["", "", ""], + "tooltip": false, + "interval": 3 + }, + "memory": { + "format": "{}% ", + "interval": 3 + }, + "clock": { + "format": "{:%H:%M} ", + "tooltip-format": "{calendar}", + "format-alt": "{:%Y-%m-%d}" + }, + + "hyprland/workspaces": { + "format": "{icon}", + "format-icons": { + "urgent": "", + "active": "", + "default": "" + }, + "on-click": "activate", + "sort-by-number": true, + "persistent-workspaces": { + "*": 10 + } + }, + + "hyprland/language": { + "format-en": "En", + "format-fa": "Fa" + }, + "wireplumber": { + "format": "{volume}% {icon}", + "format-muted": "", + "format-icons": ["", "", ""], + "tooltip": false + }, + // "pulseaudio#device": { + // "format": "{icon}", + // "format-bluetooth": "{icon}", + // "format-icons": { + // "headphone": "", + // "hands-free": "", + // "headset": "", + // "phone": "", + // "portable": "", + // "car": "" + // }, + // "tooltip": false + // }, + "pulseaudio#mic": { + "format": "{format_source}", + "format-source": "{volume}% ", + "format-source-muted": "", + "on-click": "wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle", + "tooltip": false + }, + "battery": { + "states": { + "warning": 30, + "critical": 15 + }, + "format": "{capacity}% {icon}", + "format-charging": "{capacity}% ", + "format-plugged": "{capacity}% ", + "format-alt": "{time} {icon}", + "format-icons": ["", "", "", "", ""], + "interval": 3 + }, + "network": { + "format-wifi": "{essid} ({signalStrength}%) ", + "format-ethernet": "{ipaddr}/{cidr} ", + "tooltip-format": "{ifname} via {gwaddr} ", + "format-linked": "{ifname} (No IP) ", + "format-disconnected": "Disconnected ⚠", + "format-alt": "{ifname}: {ipaddr}/{cidr}", + "interval": 3 + }, + "backlight": { + "format": "{percent}% {icon}", + "format-icons": ["", "", "", "", "", "", "", "", ""], + "tooltip": false + } +} + diff --git a/desktops/hyprland/etc/skel/config/waybar/style.css b/desktops/hyprland/etc/skel/config/waybar/style.css new file mode 100644 index 0000000..a613863 --- /dev/null +++ b/desktops/hyprland/etc/skel/config/waybar/style.css @@ -0,0 +1,182 @@ +@import url("colors.css"); + +* { + /* `otf-font-awesome` is required to be installed for icons */ + font-family: FontAwesome, FiraCode; + font-size: 13px; +} + +window#waybar { + background-color: rgba(0, 0, 0, 0); +} + +#tray, +#cpu, +#temperature, +#memory, +#clock { + margin: 0 10px; + background-color: transparent; +} + +#tray > .passive { + -gtk-icon-effect: dim; +} + +#tray > .needs-attention { + -gtk-icon-effect: highlight; +} + +#cpu { + color: @comment; +} + +#temperature { + color: @comment; +} + +#temperature.critical { + color: @red; +} + +#memory { + color: @comment; +} + +#clock { + color: @yellow; +} + +.modules-left { + margin: 4px 4px 4px 10px; + padding: 0 5px; + border-radius: 15px; + border: 0.5px solid @background-darker; + background-color: @background; + box-shadow: 0.5px 0.5px 3px @background-darker; +} + +#workspaces button { + color: @green; + background-color: transparent; + border-radius: 50%; +} + +#workspaces button:hover { + box-shadow: 0.15em 0.15em 0.5em rgba(255, 85, 85, 0.6); +} + +/* #workspaces button.active { + color: @green; +} */ + +#workspaces button.empty { + color: @selection; +} + +#workspaces button.urgent { + color: @red; +} + + +#workspaces { + padding: 4px; + background-color: transparent; +} + +.modules-center { + margin: 4px; + border-radius: 15px; + border: 0.5px solid @background-darker; + background-color: @background; + box-shadow: 0.5px 0.5px 3px @background-darker; +} + +#language, +#wireplumber, +#pulseaudio, +#battery, +#network, +#backlight { + margin: 0 10px; + background-color: transparent; +} + +#language { + color: @yellow; +} + +#wireplumber { + color: @orange; +} + +#wireplumber.muted { + color: @comment; +} + +/* #pulseaudio.device { + color: @purple; +} */ + +#pulseaudio.mic { + color: @red; +} + +#pulseaudio.mic.source-muted { + color: @comment; +} + +#battery { + color: @foreground; +} + +#battery.charging, #battery.plugged { + color: @green; +} + +@keyframes blink { + to { + color: @foreground; + } +} + +#battery.critical:not(.charging) { + color: @red; + animation-name: blink; + animation-duration: 0.5s; + animation-timing-function: linear; + animation-iteration-count: infinite; + animation-direction: alternate; +} + +#network { + color: @cyan; +} + +#network.disconnected { + color: @red; +} + +#backlight { + color: @comment; +} + +.modules-right { + margin: 4px 10px 4px 4px; + padding: 0 5px; + border-radius: 15px; + border: 0.5px solid @background-darker; + background-color: @background; + box-shadow: 0.5px 0.5px 3px @background-darker; +} + +tooltip { + border-radius: 15px; + border: 0.5px solid rgba(30, 31, 41, 0.75); + background-color: rgba(40, 42, 54, 0.75); + box-shadow: 0.5px 0.5px 3px @background-darker; +} + +tooltip label { + color: @foreground; +} \ No newline at end of file diff --git a/desktops/hyprland/etc/skel/config/wofi/config b/desktops/hyprland/etc/skel/config/wofi/config new file mode 100644 index 0000000..cea85ab --- /dev/null +++ b/desktops/hyprland/etc/skel/config/wofi/config @@ -0,0 +1,4 @@ +mode=drun +width=25% +insensitive=true +no_actions=true \ No newline at end of file diff --git a/desktops/hyprland/etc/skel/config/wofi/style.css b/desktops/hyprland/etc/skel/config/wofi/style.css new file mode 100644 index 0000000..e1f7807 --- /dev/null +++ b/desktops/hyprland/etc/skel/config/wofi/style.css @@ -0,0 +1,52 @@ +window { +margin: 0px; +border: 1px solid #bd93f9; +background-color: #282a36; +} + +#input { +margin: 5px; +border: none; +color: #f8f8f2; +background-color: #44475a; +} + +#inner-box { +margin: 5px; +border: none; +background-color: #282a36; +} + +#outer-box { +margin: 5px; +border: none; +background-color: #282a36; +} + +#scroll { +margin: 0px; +border: none; +} + +#text { +margin: 5px; +border: none; +color: #f8f8f2; +} + +#entry.activatable #text { +color: #282a36; +} + +#entry > * { +color: #f8f8f2; +} + +#entry:selected { +background-color: #44475a; +} + +#entry:selected #text { +font-weight: bold; +background-color: #44475a; +}